So yet another starting thread, I have looked but havent found the answer...
Anyway my bike 2002 FC 470, PHM 40 dellorto. Standard jets as Per manual needle circlip as manual advised mixture screw 1 1/2 turns from bottom. carb was stripped and cleaned with new parts atomiser and needle. as the carb was in a million and one parts and the idle screw was out and now I cant start it, it fires, then dies. Im thinking either not enough or too much fuel. so any advise on how to set the idle to a point where I can get the bike running would be appriecated.
thank you.
Paul
Anyway my bike 2002 FC 470, PHM 40 dellorto. Standard jets as Per manual needle circlip as manual advised mixture screw 1 1/2 turns from bottom. carb was stripped and cleaned with new parts atomiser and needle. as the carb was in a million and one parts and the idle screw was out and now I cant start it, it fires, then dies. Im thinking either not enough or too much fuel. so any advise on how to set the idle to a point where I can get the bike running would be appriecated.
thank you.
Paul
