Joined Sep 2004
186 Posts | 0+
hello,
Today opened the cilinderhead for this or next week larger exh valves.
The piston looks great te pieces on the rockerarms were also good.
But the chain was worn only2 clicks left,so this must change.
As for the 470 piston mod,I checked the deck at piston on highest point,deck was aout 0mm,while I saw a couple of weeks ago a 2003 engine with 470 piston in it(Fangio) with a deck of excact 2mm.
Next mods in future.
Testing exh valves on my dyno bench,so I can see the differents before and after.
X2 cam from Lineaweaver Racing.
greetings Madero.
Today opened the cilinderhead for this or next week larger exh valves.
The piston looks great te pieces on the rockerarms were also good.
But the chain was worn only2 clicks left,so this must change.
As for the 470 piston mod,I checked the deck at piston on highest point,deck was aout 0mm,while I saw a couple of weeks ago a 2003 engine with 470 piston in it(Fangio) with a deck of excact 2mm.
Next mods in future.
Testing exh valves on my dyno bench,so I can see the differents before and after.
X2 cam from Lineaweaver Racing.
greetings Madero.
