2012 FE 450 stalling when coming out of corners

Robo1 · Sep 8, 2021

Hi All,
My bike has been great up until last week where it has developed a stalling/cutting out problem.
Instead of blasting out of corners it has an cough and stalls when trying to accelerate. Bike dies, I hit the starter and it fires right back up and revs out until i hit the next corner or back off the throttle. It doesnt happen every time but probably 3 out of 5 times.
What's the verdict. Its a great bike but has now developed a problem.
Thanks in advance.

cambo · Sep 12, 2021

Look at videos of the ktm fueling system from taco moto . It’s very similar also check your spark plug cap it should read 5k ohms . If it doesn’t grab the threaded nub with needle nose pliers pull it out watch for the spring and fuse to pop out clean the carbon off the threaded nub / bolt reassemble using a deep well socket to press the star washers back in with the bolt

paolo6 · Sep 13, 2021

only when cornering? I had a similar problem that when the bike started reving it was cuttting out ...it came out to be the kill switch button

try disconnect it and give it a try

might be somenthing else the guy up put some good point ...you might have to fiddle a bit as who knows what it could be

good luck

let us know when you fix it

Springarn · Sep 13, 2021

Could be a fuel problem?
Try running the bike and leaning it over to the side while standing still and see if it happens? Might be time for a carb clean.

Ook Peter · Sep 15, 2021

I assume 2012 FE450 is a 70dgr bike, has injection. And fuel filters or ignition are more likely spoilers in that case.

Search

Search

2012 FE 450 stalling when coming out of corners

Robo1

cambo

paolo6

Springarn

Ook Peter

Similar threads

Register CTA

Recent Discussions