2011 FS570 - Can't get GAS CAP off

husabergwannabe · May 17, 2012

Hi everyone,

I'm trying to get the Gas Cap off on my new (2011) FS 570 and it just wont move, im pressing the release button but it wont turn.. has anyone else had this problem?

Thanks in advance,

SMWB

Ruger · May 17, 2012

Oh yes. It's rather common. While pressing on the release tab, also press on the vent nipple. Put a good amount of weight on it and TURN HARD.

Once off, there are a couple of things you can do. I've had good success with putting a little silicone grease (like you'd use in brake applications) on the lip of the fuel tank. Others will tell you to round the locking tabs, and still others will tell you to cut them off.

maKe · May 17, 2012

I put silicone spray grease on the cap and it's fine for few months. When it starts to get a bit tight again spray some more.

Lost Rider · May 20, 2012

Having had a similar situation and following the advice from a similar thread here I just opened up the gas cap and removed the 3-pronged locking thingy and put it back together.
There's more than enough tension/resistance to hold the cap on without it and it's much easier to remove now.

Search

Search

2011 FS570 - Can't get GAS CAP off

husabergwannabe

Ruger

maKe

Lost Rider

Similar threads

Register CTA

Recent Discussions