Joined Nov 2001
17K Posts | 774+
Ely, England
you have the year where the rockers were updated. i have an '02 as well so...
i suggest that you take the rocker cover off with the bike at TDC on the compression stroke. look inside the rocker cover at the roller bearings on the end of the rocker arms. if they're a pin fit through the bearings bad news. if it looks like a pin inside a hollow dowel that's good news.
when you look at it i would remove the camchain tensioner and check for how many ratchet teeth are left.
so
rocker cover off check what follower bearing pins you have-replace if necassary.
check camchain tensioner teeth and change camchain if necassary (go to an '05 D.I.D chain. change tensioner to '05 as well.
and that should be it. check that the camwheel is not aluminium. cxhange if is.
regards
Taffy
i suggest that you take the rocker cover off with the bike at TDC on the compression stroke. look inside the rocker cover at the roller bearings on the end of the rocker arms. if they're a pin fit through the bearings bad news. if it looks like a pin inside a hollow dowel that's good news.
when you look at it i would remove the camchain tensioner and check for how many ratchet teeth are left.
so
rocker cover off check what follower bearing pins you have-replace if necassary.
check camchain tensioner teeth and change camchain if necassary (go to an '05 D.I.D chain. change tensioner to '05 as well.
and that should be it. check that the camwheel is not aluminium. cxhange if is.
regards
Taffy
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
