This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2001 550 Engine rebuild

mdp

Joined Jun 2010
14 Posts | 2+
uk
Evening all

Got a 2001 550 in to rebuild after a bearing failure, just in the process of getting a parts list together

If anybody can help with the following it would be greatly appreciated
Mainly relating to interchangeability between the 01-03 Bergs and the 04-08 KTM Bergs

cylinder liner 200 241-01 = 81530005000?
piston 200 246-01 = 100mm 04-08 piston?
rod 210 191-01 = 80030015000 listed as not available, alternative supplier?
Counter balance assembly 80030057000?
balance shaft 210 160-01 = 80030059000?
timing gear 200 043-01 = 80036037000?
washer 230 040-01 not used with above?
timing chain?
clutch hub 230 006-01 = 59032002500?

More to follow I'm sure
Thanks in advance
 
"2001 550. rebuild after a bearing failure

cylinder liner 200 241-01 = 81530005000?
piston 200 246-01 = 100mm 04-08 piston?
rod 210 191-01 = 80030015000 listed as not available, alternative supplier?
I MAKE A ROD KIT FOR THIS BIKE https://www.taffmeisters.co.uk/advanced_search_result.php?keywords=100038&search_in_description=1&x=0&y=0
Counter balance assembly 80030057000?
I MAKE BALANCER BEARINGS FOR THIS ASSEMBLY. https://www.taffmeisters.co.uk/product_info.php?products_id=1285
balance shaft 210 160-01 = 80030059000?
HAVE A LOOK AT THIS SHAFT. IF IT IS JUST ONE DIAMETER IT IS A TRUE 2001 AND YOU MUST STICK WITH 2001 PARTS AND NOT MIX THEM WITH ANY OTHER AGE. I HAVE NEW 2001 ONES https://www.taffmeisters.co.uk/product_info.php?products_id=2804
timing gear 200 043-01 = 80036037000?
A FINISHED ITEM. YOU MIGHT FIND ONE BUT I HAVE THEM. https://www.taffmeisters.co.uk/product_info.php?products_id=385 PEOPLE SWOPPED CAMS SO THE ALIGNMENT IS SOMETHING I ALWAYS CHECKED ANYWAY.
washer 230 040-01 not used with above? TOO WIDE. THE CAMCHAIN PLATES CATCH IT.
timing chain?
66 LINK https://www.taffmeisters.co.uk/product_info.php?products_id=2429
clutch hub 230 006-01 = 59032002500?

More to follow I'm sure"


I'm sure if you let me take the worry of getting it right off you you'd get all the right parts and the jobs done. if genuine trade enquiry I can do something off for sure.....the walls have ears!

cheers

Taffy
 
Last edited:
OK thanks
I will most likely contact you directly when I have a complete list
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions