1995 FE600EL workshop manual needed

velocipede1 · Oct 9, 2006

I just purchased my first Husaburg, and now my leg needs medical attention.
A prior owner removed all of the electric start components and lost some of the internal parts. I need a Workshop manual for a 1995 600 enduro to identify the missing parts and reinstall the starter. Where can I find a manual and the lost gears?

I did roll the bike down a hill to get it going, and all I can say is "WOW".

Thanks in advance,
Dean

LeFrog · Oct 10, 2006

You may want to learn to kick start it anyway because the bike will most likely not start cold on the button. The e-start here is mostly an e-restart and when it's hot the bike will restart with just one kick, if all is set properly. That's why many removed the starter.

From www.husaberg.se, download section:

89-96 Owner's Manual

89-96 Parts Manual

You need to first do the following:

. Put new gas in
. Clean carburetor
. New plug if needed
. Make sure you have spark
. Adjust the valves

With all that done the bike should kick start if you give good kicks from top to bottom, right after TDC.

Come back and tell us how it goes.

And yes: "Wow".

Search

Search

1995 FE600EL workshop manual needed

velocipede1

LeFrog

Similar threads

Register CTA

Recent Discussions

Recent Discussions