Joined Jun 2008
1K Posts | 98+
Simi Valley Ca.
The last ride was good and my 06 FS650 ran well. I had been meaning to check the Camchain tensioner so I did so today. At 147 hrs it's maxed out on the last click.
Its a good thing I checked it and I also have an IWIS 70 I got from Taffy waiting to go in.
This will be the second time for me. I changed my 05 650 Camchain at 105hrs. It had 2 clicks left.
I wound it in and will do the same with this one. Hope it goes just as well as the last . I just took my time slowly hoisting the old chain out as the new went in.
While I'm there I will inspect Cam Follower bearings and set the valves upon finishing.
Then use 515 as a sealant for the rocker cover.
pollo
Its a good thing I checked it and I also have an IWIS 70 I got from Taffy waiting to go in.
This will be the second time for me. I changed my 05 650 Camchain at 105hrs. It had 2 clicks left.
I wound it in and will do the same with this one. Hope it goes just as well as the last . I just took my time slowly hoisting the old chain out as the new went in.
While I'm there I will inspect Cam Follower bearings and set the valves upon finishing.
Then use 515 as a sealant for the rocker cover.
pollo
