105mm liner for 650 plus other -00-08 Husaberg stuff
Connection rod made by Hot Rods, it has HR 607 stamped in it. Lenght about 139.6mm, big end is for 32mm pin, little end has a needle bearing for 24mm pin.
Price: open to offers
Original 37mm inlet valve. had it inspected in a shop and they told it was good. I also have another but its not that good, looks fine to me but they didn't think so.
Price: 40 euros for both.
Blackbird decalset for -06-08. New and complete.
55 euros
New black radiator shrouds for -06-08.
Price: 30 euros
Brake pads for FTE 4-piston front caliper (FS models -05-08 ).
Also fits Aprilia SXV and KTM SMR.
58613030200 new, in original box. Retail price here is 63 euros.
Price 30 euros
Brand new 105mm liner from JBS Racing.
Fits in stock cases. SOLD
I also have a piston 104.70mm, but its for 24mm pin, and the compression height is about 27.8mm, so ~5mm taller than my stock piston.
The top two rings are new but it is missing an oil ring.
Price: Open to offers SOLD
JBS Racing crankshaft with 86mm stroke, it has an Arrow conrod ~136mm lenght. Very little play in the big end bearing. Little end bushing is for 24mm pin. Balanced with some add on weights (tungsten?).
SOLD
All these combined the piston rises 9mm higher than original (-02 644cc), crank +2mm, conrod +2mm, piston +5mm.
Remus FreeRide exhaust complete system, Titanium, Racing2, 48 mm.
Good condition, hasn't experienced any falls. I believe it fits 550/650 year -05-08 but I had it in -02, just had to change the kickstart lever. Selling it because i have SR Racing pipe, altough this fits better.
Need 4 Speed Exhausts
Price 430 euros SOLD
Location: Finland
Paypal or bank transfer.
pekka.lanttola(a)nic.fi
Connection rod made by Hot Rods, it has HR 607 stamped in it. Lenght about 139.6mm, big end is for 32mm pin, little end has a needle bearing for 24mm pin.
Price: open to offers
Original 37mm inlet valve. had it inspected in a shop and they told it was good. I also have another but its not that good, looks fine to me but they didn't think so.
Price: 40 euros for both.
Blackbird decalset for -06-08. New and complete.
55 euros
New black radiator shrouds for -06-08.
Price: 30 euros
Brake pads for FTE 4-piston front caliper (FS models -05-08 ).
Also fits Aprilia SXV and KTM SMR.
58613030200 new, in original box. Retail price here is 63 euros.
Price 30 euros
Brand new 105mm liner from JBS Racing.
Fits in stock cases. SOLD
I also have a piston 104.70mm, but its for 24mm pin, and the compression height is about 27.8mm, so ~5mm taller than my stock piston.
The top two rings are new but it is missing an oil ring.
Price: Open to offers SOLD
JBS Racing crankshaft with 86mm stroke, it has an Arrow conrod ~136mm lenght. Very little play in the big end bearing. Little end bushing is for 24mm pin. Balanced with some add on weights (tungsten?).
SOLD
All these combined the piston rises 9mm higher than original (-02 644cc), crank +2mm, conrod +2mm, piston +5mm.
Remus FreeRide exhaust complete system, Titanium, Racing2, 48 mm.
Good condition, hasn't experienced any falls. I believe it fits 550/650 year -05-08 but I had it in -02, just had to change the kickstart lever. Selling it because i have SR Racing pipe, altough this fits better.
Need 4 Speed Exhausts
Price 430 euros SOLD
Location: Finland
Paypal or bank transfer.
pekka.lanttola(a)nic.fi
Last edited:
