This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

09 FE570 Warning ligth lights up.

Joined Feb 2009
26 Posts | 2+
Norway
Hi poeple ;)
Hope some of you can help me a bit with my FE570. After an 22km trip on the road the warning ligth startet to light. The ligth flashes 1 time long, and then 3 times short. Lokked in the manual, where it statet that it was the intake air temp sensor. Cheked the wires to the sensor, and discovered that they hade snapped. Dunno how that happend. But the plug that goes in to the sensor looked like this:

http://i22.photobucket.com/albums/b312/ ... oglede.jpg

So, soldered it back togheter, but still the warning ligth ligths up :(
Cheked my soldering, and cheked if the wires was short circuited. But they aint sc'ed.
Is it posible that the air temp sensor is destroyed ?
 
if poss measure the resistance of the saensor using low ohm meter,i suspect you should get some kind of resistance,may be some one else on here could measure theres to give you some idea what the reading should be
 
Hi Burud, You can measure the resistances all day, but you need to take your bike to your dealer to have the fault code removed from the memory of the ECM.
Best Regards
Sutto
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions