This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

09-12 FE handlebar recommendations?

U

Uncaged

Joined Dec 2015
9 Posts | 3+
NW PA
Time to replace my stock handlebars. Any suggestions for my 2010 FE 390. I'm 6'0 ish...XL arms, XL waist...

TMI??

Thanks guys.

Still lovin my 70 deg. Berg!

UC
 
go to the local supply shop and try a few ...its a hard question to answer everyone has his preference.
 
For you at your height I guess the question is of you like to use handle bar riser or not :) Regarding the handle bar choice I agree with paolo6.
 
Just bought a set of fasst flexx bars, 12 degree enduro bend. I also have the pdhs handlebar mounts with the 5mm riser. Riding this weekend with the flexx bars for the first time and I'm 6'2" or 187cm (for you metric folks) and am right at 200 pounds with gear on.
 
Try ...and see how you fell ...are you novice/inter or pro?

1) What I normally do take a book and whrite everything how many click you have in the fork shock ..handlebar set up

2) whrite what kind of track you racing ...fast/ slow / tipe of corner etc...

3)start messing around and see how you fell

You will be fine ...but the answer is kind of magic
Myself ==> most people like ktm because of steel frame but I do actually prefer alluminium I love Honda ...now people on this forum are going to kill me
 
Stealing this thread for just a moment. I would like to get stock style bars on a 2011 but narrower. My problem is I can't cut My stock bars any shorter to much stuff on them. 2" or 50mm shorter would be great. Got any ideas. Thanks
 
Rainerio said:
Stealing this thread for just a moment. I would like to get stock style bars on a 2011 but narrower. My problem is I can't cut My stock bars any shorter to much stuff on them. 2" or 50mm shorter would be great. Got any ideas. Thanks
Click to expand...

do you know the original dimension ...and is (A)you would like to change?
 

Attachments

  • Handlebar-Dimensions.jpg
    Handlebar-Dimensions.jpg
    13.4 KB
Rainerio said:
Yes it's A and dimension 31 7/8" or 81 centimeters
Click to expand...

there needs to be more dimension height,rise etc. (31 is inches)?

have a look at this website

Renthal Universal Off-Road Handlebar Size Chart - Motorcycle Superstore

Renthal - MX / Enduro - 7/8"

https://www.scribd.com/doc/47908296/handlebar

there is a few of them shorter then 81cm

if you cant find any (and want the exact other dimension) you have to think about cutting them ...if you have the same kind of handlebar of the picture before take off the protection bar and add the switches on (C)..i would personally avoid this one just too much mess around...
but also you need to think, if you want a new pair shorter it will cause the same issue of having too much stuff on them ?

hope it can be kind of helpful I am just not sure what I can suggest you
 
  • Like
Reactions: 1 person
Rainerio said:
Stealing this thread for just a moment. I would like to get stock style bars on a 2011 but narrower. My problem is I can't cut My stock bars any shorter to much stuff on them. 2" or 50mm shorter would be great. Got any ideas. Thanks
Click to expand...

I justb cut 1" off each end of the bars on every bike i own. end of.

Taffy
 
Uncaged said:
I'm not sure that my local shop would let me try different handlebars??
Click to expand...

Go there with tools and just say I am not sure witch one to pick could I have a try I have the bike outside ...depends also where you going but a local shop run by a nice guy will let you ...they done it with me
 

Similar threads

K
AM fuel pump parts sourcing problems
Replies
1
Views
1K
o6550
o6550
2ndGen
570 longevity question...
Replies
6
Views
2K
2ndGen
2ndGen
T
'11 FE 570 EU - standard TPS setting?
Replies
1
Views
778
MountainBerg
M
D
Husaberg FE/TE/FX/FS 09-12 compatibility
Replies
2
Views
2K
datahop
D
S
Spencer's fs/fe 650
Replies
5
Views
2K
o6550
o6550

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions