Joined Nov 2001
17K Posts | 774+
Ely, England
waterpump location of the '96 is on the head and on the '02 it is in the sidecover. should just need to get the later hosepipes i should think.
hydraulic versus manual clutch pull?
angle of exhaust headers etc?
i would try and park up next to a 501 and with the owners permission spend a bit of time measuring and looking.
checkout ignition wiring and the carb location and then tell us all how well you did. good luck!
Taffy
hydraulic versus manual clutch pull?
angle of exhaust headers etc?
i would try and park up next to a 501 and with the owners permission spend a bit of time measuring and looking.
checkout ignition wiring and the carb location and then tell us all how well you did. good luck!
Taffy
Swap
I have seen a 1998 motor in a 2002 frame the owner said it bolted right in he said the bike is much more reliable and made more power.
I have seen a 1998 motor in a 2002 frame the owner said it bolted right in he said the bike is much more reliable and made more power.
Joined Jul 2001
3K Posts | 1+
El Sobrante, Ca. 94803
A post 2000 engine will indeed fit a pre 2001 chassis potentially providing for a cost effective project. 
Hope this helps.
Sincerely,
Dale
Hope this helps.
Sincerely,
Dale
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
