Joined Oct 2015
128 Posts | 29+
UK (southeast)
Nice cheap project bike here for someone. It's an 02 FC550 road registered with V5 in my name (no MOT). Needs a few bits and pieces to complete, and a bit of tinkering, but it's mostly complete and more importantly - runs!
Needs the following -
Headlight (same as loads of early KTM EXC/LC4's so should be easyto pick one up)
Tanks plastics/scoops and tank mounting bungs
Chain joining/split link + an extra link (I might have a complete chain the right size I can chuck on it - will have a look)
The following will need attention -
Brakes/clutch need bleeding
1 exhaust header is missing the insert/sleeve that slots into the cylinder head - should be possible to get a bit welded on easily
The wiring is a bit of a mess - luckily 2 complete wiring looms/harnesses are included so should be easy to patch together with the aid of a wiring diagram
It's fitted with a Keihin FCR41 that was previously on a 650, so will likely need some adjustment there
Forks are from a KTM 450SX, seals need replacing
Comes with a few extra parts - aftermarket exhaust silencer (MHP I think, needs a strap - universal ones are only £6 on ebay), complete extra wiring harness regulator/rectifier etc. + rear light (the extra CDI is the original FC one which is broken - included in case it's of use), original front caliper bracket in case you want to put off road wheels on.
I think that's pretty much it - if I remember any more, will post it up.
£900 I'd consider breaking it if anyone wants the engine?
Needs the following -
Headlight (same as loads of early KTM EXC/LC4's so should be easyto pick one up)
Tanks plastics/scoops and tank mounting bungs
Chain joining/split link + an extra link (I might have a complete chain the right size I can chuck on it - will have a look)
The following will need attention -
Brakes/clutch need bleeding
1 exhaust header is missing the insert/sleeve that slots into the cylinder head - should be possible to get a bit welded on easily
The wiring is a bit of a mess - luckily 2 complete wiring looms/harnesses are included so should be easy to patch together with the aid of a wiring diagram
It's fitted with a Keihin FCR41 that was previously on a 650, so will likely need some adjustment there
Forks are from a KTM 450SX, seals need replacing
Comes with a few extra parts - aftermarket exhaust silencer (MHP I think, needs a strap - universal ones are only £6 on ebay), complete extra wiring harness regulator/rectifier etc. + rear light (the extra CDI is the original FC one which is broken - included in case it's of use), original front caliper bracket in case you want to put off road wheels on.
I think that's pretty much it - if I remember any more, will post it up.
£900 I'd consider breaking it if anyone wants the engine?