00 FC600 with KEIHIN 41---jetting?

Bergi600 · Jun 10, 2006

Hi guys,

may somebody could help me.....I have some guessing about my jetting, but maybe one of you fine people can confirm this....

....letsÃ‚Â´ start:

needle: OCDVR/7th position from the top
main jet: 178
idle jet: 48

The bike starts 3rd kick when cold.....refuses to start at all when hot....when I bump start it, it fires up immediately!....idle jet too big???

When I enter a turn and let off the throttle the bike pops a little bit!

....so, if somebody has some suggestions, let me know!!!!

LINEAWEAVER · Jun 10, 2006

Hi Bergie and welcome aboard.
Enjoy the site and enjoy your Husaberg.

Take the following with a grain of salt. :wink:

Arrogant, conceit, confident, whatever, such is the best advice I can give.

Sincerely,
Dale

PS
Do a search via UHE regarding said kit.

Taffy · Jun 11, 2006

i have posted up some jetting settings for my tuned 400. the settings are in 'the doc' they will do for your bike if you start with a 168MJ you should be fine.

as 'the doc' states though, you can get the jetting 90% good but dale's needle does find you another 10%.

i have settings for the DVR needle there.

to be getting on with for now though. your bike is indeed too rich and the PJ IMHO is too large. i ran a 35 on my yam WR and i run a 35/38 now.

you must adjust the PS underneath for the best response when the engine is warm and do it by doing snap wheelie and acceleration tests.

regards

Taffy

Search

Search

00 FC600 with KEIHIN 41---jetting?

Bergi600

LINEAWEAVER

Taffy

Similar threads

Register CTA

Recent Discussions