This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

start but dies ... husaberg 650 2002

Joined Aug 2009
54 Posts | 0+
sweden
hi

now after the fcr 41 upgrade i was going to start the bike, but it just start for about 3-4 seconds, when i try it again i dosent starts, but if i pull the trhottle pulley about 10 times i starts about 3-4 seconds again and so it goes ?
do anyone have got some idea ?

best regards
daniel///
 
need more info.
jetting? has it been cleaned? mkI or mkII? pump squirt duration?
 
hello !

i have the road and track needle kit from taffy, i just cleaned it up but can not find any problem.how do i check the duration ?
i think its a mkII .. how do i se the diffrence ??

best regards
daniel
 
sounds like you don't have a choke on it and you're usin the APJ to squirt in some juice?

you need a choke circuit with that kit for sure!

regards

Taffy
 
hi !

it is choke on the carb, i will take som picktures and upload it here soon ...

regards
daniel
 
have you done other work at the same time? the SEM ignition could be on it's way out?

regards

Taffy
 
sending some pics now ! hope it help some one :)
 

Attachments

  • SANY0520 (Small).JPG
    SANY0520 (Small).JPG
    44.6 KB
  • SANY0521 (Small).JPG
    SANY0521 (Small).JPG
    45.6 KB
  • SANY0522 (Small).JPG
    SANY0522 (Small).JPG
    44.4 KB
oh! one of those carbs....

the starter jet wants to be an 80 or 85 ok?

regards

Taffy
 
hultz did you sort your problem out, what was the answer? mines doing simular but no flames or glowing pipes, mind I dont run it that long.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions