In the carb photo I see the standard manual choke and hot start knobs. I don't know what the 'wire' is hooked to. Is it connected to the TPS (throttle position sensor)?
Joined Dec 2004
2K Posts | 248+
back in cottonwood, az
if the cable (wire) on the carb on the left is a problem, disable it. does it go clear to the handlebars, or does it just mount to the other side of the carb in a loop?
also, that is an odd looking dellorto. what model is it? my '03 501 has a phb roundslide on it.
the standard choke setup on the fcr should be fine.
also, that is an odd looking dellorto. what model is it? my '03 501 has a phb roundslide on it.
the standard choke setup on the fcr should be fine.
On the FCR the choke is the black knob. Just remove the cable from the delorto and use the manual black knob.
hi !
ok ! so i should replace the wire with a plug instead ? i can get you som more fotor in the morning ...
best regards
daniel //
ok ! so i should replace the wire with a plug instead ? i can get you som more fotor in the morning ...
best regards
daniel //
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
hultz said:
If the wire is a TPS wire (throttle position sensor) then merely remove it, as Ned stated, the best you can and plug any holes. Or just tape the end and tie it out of the way. As your ignition has no provision for the TPS you can't use it and it won't hurt anything if it is not used.
hi !
on the picture i have a fcr 41 and a fcr 39 . so that all can se the diffrents on the cabs. the 41 that will go on the bike is the one whit the wire instead of a choke plug.
on the picture i have a fcr 41 and a fcr 39 . so that all can se the diffrents on the cabs. the 41 that will go on the bike is the one whit the wire instead of a choke plug.
Joined Mar 2006
2K Posts | 4+
mid-wales, uk
hultz said:
We all got a little confused, thinking the photos was of the dellorto and the fcr.
now in pic 1 i reckon that the 2 arrowed pipes are just vents missing their pipes, is that correct?
as for the choke, could it be that what looks like a black plunger below the cable is the choke and the cable is actually a bar mounted hot start?
hi !
thats correct .. i was just i little bit insecure
the carb was taken of a honda CRF450 .. i dont know but do they have it ? pictures please ?
would be great if someone has got that information ...
best regards
daniel//
thats correct .. i was just i little bit insecure
the carb was taken of a honda CRF450 .. i dont know but do they have it ? pictures please
? would be great if someone has got that information ...
best regards
daniel//
hi !
ok so you say that should get the "control arm" from the honda and mount that on my bar and connect the cable to it ?
best regards
daniel//
ok so you say that should get the "control arm" from the honda and mount that on my bar and connect the cable to it ?
best regards
daniel//
if you want the hot start yes get a lever, if not there is a plastic plug what will take the cable's place.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
