Adjustable Foot Rests
- Thread starter pollo
- Start date
-
- Tags
- adjustable foot rests
Help Support Husaberg:
Not sure about the part number but I have some genuine adjustable pegs on my 07 650. The range of adjustment is designed to go up and forward. I modded them to go down and back, but not as much as I'd like. I am going to get some Fastway pegs that do go down and back. The genuine ones are also expensive. Aftermarket pegs may not be listed for Bergs, but KTM ones fit later models, post, & including, 2000 I think. Mine also came in a KTM box.
Steve
Steve
- Joined
- Jun 6, 2008
- Messages
- 1,092
- Location
- Simi Valley Ca.
to get what I want, which is to just lower I might leave the mount where it is and cut the rest of the peg off, lower it 1/2 inch and weld it back on. I may have to weld a little plate though so the loaded spring can have a place to rest against. I'm pondering just how it will be affective. The cut and reweld needs to be right on because there's not much room to be doing this. I have access to a plasma cutter, but might just take my time and die grind it off so I don't make a mistake.
Pollo
Pollo
Have a look in my gallery when its back up and you'll see what I did with mine. I also cut and welded my 501 pegs with the same objective, pics in the gallery too.
You may get what you want by modifying the pivot so the pegs slide down and back which is what the Fastways do and one of the mods I made to the my 650's adjustable pegs.
Steve
You may get what you want by modifying the pivot so the pegs slide down and back which is what the Fastways do and one of the mods I made to the my 650's adjustable pegs.
Steve
I am trying to achieve the same, down and back. The OE berg items are dear as sin and KTM not much better. The Fastways seem to be the best value items I can find and have just ordered a set.
http://www.ballards.cc/Text/12028789942 ... LOGUE-2008
Tim
http://www.ballards.cc/Text/12028789942 ... LOGUE-2008
Tim
- Joined
- Jun 6, 2008
- Messages
- 1,092
- Location
- Simi Valley Ca.
I wanted to go down but not back andmore than just the 6mm that the adjustable berg ones went. So I took them to work today and cut the pivot section off of them repositioned them 1/2 inch higher to lower the peg and rewelded. I also built a small weld wall on the upper section for the spring to come up against. They work and feel great! Here's a pic. Sorry for the fuzzy cell phone shot but you can get an idea of what im talking about. With this mod, 1/2 inch down only, the brake and shifter feel as though this should be the factory way of placing them.
Pollo
Pollo
Attachments
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
