This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

IXU24 Test

Joined Mar 2005
3K Posts | 3+
Mesa, AZ
What do I need to set the gap at on a IXU24? I would like to try one to see the difference but I think the gap is a little too much as stock.

What's your idea?

Thanks
 
RE: IXU24 gap

about 0,28" or 0.7mm should do you. be careful how you open the gap! you should use a proper tool for it but most importantly - miss the earth post!

regards

Taffy
 
RE: IXU24 gap

Thanks. And you mean not to damage the electrode? It is a bit obvious.

How fast does that electrode wear out? Not that I put thousands of miles a year on my bike, but just wondering.
 
RE: IXU24 gap

it would probably take 10,000 mils on a bike due to the rich lean ***** life. then you would see wear.

regards

Taffy
 
RE: IXU24 gap

On my cars and trucks I usually change them after 30,000. I guess that's because there is not a spark at each TDC and the RPM is lower.

I just would like to see what the rave is all about.
 
RE: IXU24 gap

This is off the subject a bit but are the Iridium plugs actually any better?
The Berg and Kato shops around here don't recommend them and the Kato dealer even went so far as to say that they're crap and has doesn't sell them anymore.
Just want some opinions from you guys who are using them.
 
RE: IXU24 gap

i can't post photos coz the download on the gallery doesn't work specifically for me!

but if anyone will take the photos i hAve that bergoroadracer supplied, we can put them up and you'll be left in no doubt!

i came to this website quite happy with good quality plugs but became converted when i detected a clear difference in how they started, revved and lasted. nah! i love 'em now and wouldn't go back.

what i do believe is that palladiumd and iridiums etc are better than standard and that there is no need to have some of the EVEN more special ones available that have numbers going around the plug twice!

PM me if you can host these photos.....

regards

Taffy
 
Ok that was a fast one :D

I think this is a bit too dark, (sorry bad photo)... Not seeing any big difference with the NGK, by the way, which has a nice gray color.
 

Attachments

  • IXU24_400.jpg
    IXU24_400.jpg
    10.4 KB
I have decided to reinstall the former plug, an NGK DCPR8. I believe the IXU24 needs some carburetor adjustment, compared to the NGK, as it ran obviously rich (dark color and wet, vs nice gray with the NGK). It explained for my hard restart even with the SEM stator rewound by SEM and cold starts could take up to 20 kicks. After a side fall, the bike did not want to restart. It stalled a lot, and the power was not all there.

After reinstalling the NGK, it took 2 kicks cold, and I had the tank off, meaning no gas in the carb and I adjusted the valves, meaning nothing in the cylinder either.

I suppose the IXU24 can work well with a slightly leaner setting.
 
you are talking out of your arse as usual froggy!

but what's the point in saving you everytime?

you're so sure of the answers ALL the time recently. at last 2 + 2 = 5 for you everytime.

regards

Taffy
 
mr le frog sir ..

perhaps a touch of confusion on your behalf , the iridium plugs are the ducks guts , or the beez knees, top o' the wazza and so on and so forth .
 
Taffy said:
you are talking out of your arse as usual froggy!

but what's the point in saving you everytime?

you're so sure of the answers ALL the time recently. at last 2 + 2 = 5 for you everytime.

regards

Taffy

All I know is that this spark plug did not work as expected for me. I tried adjusting the gap, no workie. I tried adjusting fuel mixture, no workie either. I mean, it worked, just not well.

And I don't think it was a dud either, as it did function, just badly. When I took it out to inspect it, it was dark and wet. See photo (sorry if it is blurry). Took 20 kicks to start the bike.

NGK plug: 2 kicks cold, not one issue with it. Works strong after 100+ hours, still the same plug as in 2005, except for when I was using the Champion plug for about 3 rides, which performed just as fine as the NGK back then (badly because of a faulty stator).

I don't recommend this spark plug. If you have a better experience with it, good for you. But it is not as sure a plug as the NGK.

It just did not work in my Dellorto/SEM/2001. Now, it might work just fine in a different Husaberg.

It also takes more than one review to get a good opinion. All the good motorcycle magazines have 3 reviewers minimum to comment about a bike. Taffy likes and raves about this plug, I don't. Now Taffy is a trained mechanic, expert rider and knows his bike by heart. I am a different rider. If someone else has an opinion about this plug, please let us know.

Have a good day.
 
  • Like
Reactions: 1 person
i have told the story of how a plug behaves soooooo many times i could have a night out on this tale alone.

when a plug has been flooded out or overheated it's just about pohiqed/finished/finito. this is all that has happened to this plug froggy. you are obviously still well rich. the IXU has terminated it's contract and left the building.

if you want it back to life it has but one chance left! send it to me and i'll put it in a properly jetted bike and get another three seasons racing out of it!

regards

Taffy
 
It was like that from the get go, Taffy. And that carb is spot on otherwise. Dale jetted it, it is properly maintained.
 
spot on? never, i didn't touch it!

the fact is that if that plug got badly flooded it can only recover by being given a phuqing good thrashing in 4th, 5th, 6th gear for a long ride. that might save it but i get the feeling you're like my mum's jack russell - you'll have the last yap!

regards

Taffy
 
Taffy, each time I test something, I report about it. I gave reviews about the services of Dale Lineaweaver, Spark and MX-Tech,about the products from Thermo-Tec, Cycra, NGK, etc... as well as Denso, for their spark plug.

Don't you wish more people would give such reports? I like to read all these reviews myself, which is why I give some of my own.

To sum it up: I don't think the Denso plug is anything to rave about. It may be my setup, but nothing to do with the way I used my bike. Maybe the altitude, maybe the 90-100F heat, maybe the US gas, who knows? In which case, don't overspend on a plug, an iridium NGK will be just fine. Even a Champion cheapie plug will perform better.

And my favorite breed is the French Bulldog, now that will get you going, will it?
 
  • Like
Reactions: 1 person

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions