Cam timing & starting woos

fish · Jan 13, 2006

Hi gang,

Just wanted to check I've got my cam timing right (ish).
It's an '02 650.
Its a pig to start and will only start when it feels like it.
Once running it runs nice.
It just had a rebuild after a mains failure and the only doubt in my mind at the moment is the cam timing.
Please can one of you knowledgeable guys help a weekend meddler out.

I've attached a couple of photos taken while the engine was at TDC on compression stroke.

Taffy · Jan 13, 2006

fish

first of all forget the flywheel mark and get the single dot between the two other dots. the way to do it is in the doc under rebuilds....

secondly, you're on the wrong stroke. change the crank 360 degrees and get it with the lobes up at 11 and 1 'o clock.

when you're happy that they are symetrical and the dots are spot on- THEN you turn the crank 360 degrees and fit the rocker cover. ok?

regards

Taffy

fish · Jan 14, 2006

Cheers Taffy,

Looks like I'm a tooth out.

Which hopefully explains why its a pig start and runs flat as a witches tit.

Thanks again Boyo

Search

Search

Cam timing & starting woos

fish

Attachments

Taffy

fish

Similar threads

Register CTA

Recent Discussions