94 FE 350 I need the rubber intake boot. Where the carb connects to the engine. Any help directing me where to look would be greatly appreciated. Thanks in advance.
Questions about an old Husaberg 94 FE 350 rubber boot
- Thread starter evilspiritengineering
- Start date
Pretty sure you won´t find one.As they have a different inner diameter as the other capacities.
And 350cc bikes were pretty rare.
Maybe take a pic and show us your old inner dimensions.
And 350cc bikes were pretty rare.
Maybe take a pic and show us your old inner dimensions.
Joined Feb 2003
3K Posts | 384+
Escondido, Ca. USA
https://sudco.com/38pdf/38.pdf
Page 220 has universal intake flanges. You may be able to find one that's close.
Page 220 has universal intake flanges. You may be able to find one that's close.
took me a minute to figure out but I approached this differently. I started searching for 38mm Delorto intake rubber. Basically that sourced me a Mikuni with similar dimensions from Sudco in La which I’ve used before . They are sending me a Mikuni rubber with the same dimensions as I’m now posting. I’ll see how it works out and let you know.
1” inch 780 thou at carb
2” 750 bolt center to center
VM36-200 is the Mikuni manifold I’m trying out. It’s a little different but I think
It’s gonna work.
1” inch 780 thou at carb
2” 750 bolt center to center
VM36-200 is the Mikuni manifold I’m trying out. It’s a little different but I think
It’s gonna work.
Attachments
Thanks for your help I spoke to Sudco. Then checked back here. We had the same idea. Find something close that works.
Do you still have your FE 350?
Joined Aug 2005
307 Posts | 7+
HELLAS GREECE ATHENS FS 670cc 2004 - FS 650 2008
I was thinking to do the same thing when I realized there was no part. I’ll see if he still has them .
Similar threads
For Sale
2014 fe350
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
