This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Korbowod fe 501

Joined Nov 2023
9 Posts | 0+
Polska
received_1477952819658217-jpeg.17159
 

Attachments

  • received_1477952819658217.jpeg
    received_1477952819658217.jpeg
    69.4 KB
  • received_796792228796631.jpeg
    received_796792228796631.jpeg
    65.1 KB
  • received_849760150039139.jpeg
    received_849760150039139.jpeg
    45.5 KB
  • received_1477952819658217.jpeg
    received_1477952819658217.jpeg
    69.4 KB
  • received_796792228796631.jpeg
    received_796792228796631.jpeg
    65.1 KB
  • received_849760150039139.jpeg
    received_849760150039139.jpeg
    45.5 KB
Taffy has two 501 rods listed. One for first generation motors and one for second.

Taffmeisters

Taffy ma na liście dwie wędki 501. Jeden dla silników pierwszej generacji, a drugi dla drugich.
 
Czy ktoś wie i może ma numery OEM
 

Attachments

  • 20230527_191652.jpg
    20230527_191652.jpg
    61.9 KB
  • 20230527_155445.jpg
    20230527_155445.jpg
    71.2 KB
The Cam Follower bearings (CFB) are no longer available. You could try turning the axle over 180 degrees? buy a rocker arm (from me!) but you're in a tight spot I'm afraid!

Taffy
 
The Cam Follower bearings (CFB) are no longer available. You could try turning the axle over 180 degrees? buy a rocker arm (from me!) but you're in a tight spot I'm afraid!

Taffy

So the 01-03 Rockers are a direct bolt-in for 1st Gen motors?
 
  • Like
Reactions: Robson
let's just say that the 501/470/550/650 exhaust rockers fit straight in for the earlier 501 and 600 - 1997 plus.
the later 400 exhaust rocker fits in for the earlier 400 and 1997 that's all it can help.

the 400/501/470/550/650 inlet rockers fit straight in for the earlier 501 and 600 - 1997 plus.
nothing ideal can can only help the 1997-2000 400 inlet rocker.

but unless mixing engine parts this isn't important. the thing is, to find a rocker arm you can buy today for the needs of yesterday.
again only the 400 inlet flunks out, the rest is all do-able.

special rocker arm
despite working off the centreline of the valves in the 400, we reckon it'll still do a job but we haven't tested it.

shhhhhh!

Taffy
 
  • Like
Reactions: husabutt
Łożyska popychacza krzywki (CFB) nie są już dostępne. Może uda się obrócić oś o 180 stopni? kup wahacz (ode mnie!), ale obawiam się, że jesteś w trudnej sytuacji!

Łożyska popychacza krzywki (CFB) nie są już dostępne. Może spróbuj obrócić oś o 180 stopni? kup wahacz (ode mnie!), ale obawiam się, że jesteś w trudnej sytuacji!

Irys cukierek
Cześć, tafi, widziałem gdzieś te łożyska na waszej stronie. Nie wiem czy to były te osoby, teraz też nie mogę ich znaleźć.
 
Panowie jaki olej do 501fe 99r przed remontem latałem na ipone katana off road 10w50.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions