This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2004 Husaberg 650 FS - Where does this part go?

Joined Jan 2022
33 Posts | 4+
France
Hi guys,

I'm in the process of putting back together a 2004 650 FS, but there is this one part that I can't remember where it belongs..
Could be from a wheel axle or fork based on the diameter, but I can't find it on the drawings.

Any idea?

Thanks
 

Attachments

  • IMG_20220721_124255.jpg
    IMG_20220721_124255.jpg
    88.3 KB
Looks like the disc that sits over the axle spacer between the wheel bearings. Sits on one end over the spacer, to stop the spacer from dropping down when the axle is out. Sits beside one side bearing on later models, opposite the bearing with the circlip. Not shown on some parts lists, which is strange, as it does have a part number.
 
Thanks for the reply, yes it may we'll be that, even though I'm almost sure I did not take the bearings out. I will have a look.
Here I think it shows on the 2011 570 FS parts, nb 8 ref 60010015000.
 

Attachments

  • Screenshot_20220804-103729~2.png
    Screenshot_20220804-103729~2.png
    73.2 KB
Thanks for the reply, yes it may we'll be that, even though I'm almost sure I did not take the bearings out. I will have a look.
Here I think it shows on the 2011 570 FS parts, nb 8 ref 60010015000.
Previous owner may have put it outside the bearing after changing wheel bearings- check if the spacer between bearings can move sideways by sticking a screwdriver or similar in to try to move it. It shouldn't be able to move much so the axle will slide straight in.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions