Keihin Fcr 41 MK1 Mk2? And jettung?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 28, 2016
Messages
29
Location
Leipzig
Can anybody identifiy this Keihin Fcr? Is it a MK1 or Mk2? It is supposed to come off a Yamaha WR 426.
Is it a good Option for a '2000 Fe600? If yes, which jetting is a good point to start? My bike has an Akrapovic Full exhaust and smets (supermoto) camshaft.
Best, Simon
 

Attachments

  • _20211204_211719.jpg
    _20211204_211719.jpg
    70.7 KB
  • _20211204_211700.jpg
    _20211204_211700.jpg
    79.1 KB
  • _20211204_211634.jpg
    _20211204_211634.jpg
    83.6 KB
  • _20211204_211616.jpg
    _20211204_211616.jpg
    66.5 KB
  • _20211204_211553.jpg
    _20211204_211553.jpg
    79.9 KB
MK2
The early mk1 has the pumper mechanism on the outside

Enviado do meu M2004J19C através do Tapatalk
 
Should I put my Handys on that carb or is ist better to wait for an original Husaberg 650 FCR?
 
Needle is the most important part . And jets .
Change those and should be the same .
Check the stock jetting for the husaberg fcr and go from there

Enviado do meu M2004J19C através do Tapatalk
 
Have a close look inside to make sure the rollers haven't seized up and scored and grooved the body. If that's OK, you'd likely want to fit a new vacuum release plate too.

Its probably a 39 if it was on a 426.
 
that is the best carb - the Mk2 - so get it, even if it is a 39mm.

you'll need to get rid of that air filter adapter for the Husaberg.

I do a bespoke performance jetting kit for them (100820 on the web shop)
The AFA is 100355. you might be able to make room for the blue belmouth at 100356.

Taffy
 
Last edited:
According to the seller it's a FCR 41.
So I think it's a quite good catch for 150 €.

Thanks a lot for the Information. I'll wait now until it arrives, disassemble and clean it. Afterwards I'll male a list of needed parts and place an order :)
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top