This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

turn signals husaberg fe 450 2009

Joined Mar 2021
6 Posts | 0+
Busko
Hello,

I need info or a photo where to connect the turn signal cables, because I have a switch, but the previous owner took off the lamps. I have LED indicators and a flasher, but I don't know where to connect it. Husaberg fe450 2009

Thanks in advance and best regards friends :)
 
There should be two small plugs where the turn signals should connect. right side close to the frame number



Nuno
 
Webmonstro, each front turn signal to a separate plug? And how to connect the indicator light that signals the direction on the steering wheel? And where is the flasher?

thank you friend
 
You need this extension cable for the rear indicators.
It’s connection splits for the two indicator and is plugged in into a connector
Close to the battery. It’s tugged in between the battery holder and the subframe

Part number for the rear flasher harness: 81211081000


Kind regards
Chris
 
<a href="https://ibb.co/rQH33kv"><img src="https://i.ibb.co/VLTxxV3/20210313-113205.jpg" alt="20210313-113205" border="0"></a>
 
The cable for the flasher harness was under the fuse box.
So basically on the Right side of the bike. I had to use some
Needle nose Pliers to get the plug up from down there.

On the left side, there’s the cable connector for the rear taillight
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions