Joined May 2014
115 Posts | 23+
Tassie
Question if any one running one of Barrett muffler
She pops & backfire going down gears ,
Just wondering if possible any body in Australia running one. May happen to know best starting point for the carby setting , by any chance
As I believe needle has been adjusted since Barret muffler is fitted I don't know much about these mufflers or carby itself
Sound lean as backfire alittle going down gears & letting off throttle & it's hold revs alittle going through gears
Looks so needle coded OBEKR has been lifted
End muffler cap is black , looks so getting plenty of fuel ?
Header all seal up & pipe
Can only try do again wif muffler but I'm sure that's not 100% reason
My 08 650 muffler is straight through never touch setting runs sweet
Much appreciated any ideas I could looked at why I'm at it
I know should able run abit sweeter , even thou I'm selling it (things could change as I'm unsure atm)
just like to be 100% right
Thnxs
Guys
She pops & backfire going down gears ,
Just wondering if possible any body in Australia running one. May happen to know best starting point for the carby setting , by any chance
As I believe needle has been adjusted since Barret muffler is fitted I don't know much about these mufflers or carby itself
Sound lean as backfire alittle going down gears & letting off throttle & it's hold revs alittle going through gears
Looks so needle coded OBEKR has been lifted
End muffler cap is black , looks so getting plenty of fuel ?
Header all seal up & pipe
Can only try do again wif muffler but I'm sure that's not 100% reason
My 08 650 muffler is straight through never touch setting runs sweet
Much appreciated any ideas I could looked at why I'm at it
I know should able run abit sweeter , even thou I'm selling it (things could change as I'm unsure atm)
just like to be 100% right
Thnxs
Guys
Attachments
Last edited:
