I'm not sure as I didn't tear out the packing further down but it feels like it's one chamber packed halfway. But the packing further in stops right where the tube going through splits off. Confusing...
"half packed" is how they come from the factory. the rear section of perforated tube/ endcap is the difference between FX, FS, and FE.
FX is straight through. FE has a tortured path as such to create direction changes in the gas flow and thus remove a bit of noise.
Incidently.... have you thought about how the packing is still in there if its only "half packed"?
Looks like you have a straight through tube on yours (common performance change) that somebody has already modified.
I base my comments on the 2004 model.
FX is straight through. FE has a tortured path as such to create direction changes in the gas flow and thus remove a bit of noise.
Incidently.... have you thought about how the packing is still in there if its only "half packed"?
Looks like you have a straight through tube on yours (common performance change) that somebody has already modified.
I base my comments on the 2004 model.
Last edited:
Well that explains it! Never seen anything like it myself. And yes I thought it was rather weird that the packing that is in there was so nicely positioned if it wasn't supposed to be like that.
Thanks for the reassurance, I'll just close her back up and tighten the leaks and rattle then.
Thanks for the reassurance, I'll just close her back up and tighten the leaks and rattle then.
Similar threads
Register CTA
Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
