This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Converting my FE to an FS

pollo

pollo

Joined Jun 2008
1K Posts | 98+
Simi Valley Ca.
Hello,
I interested in converting my 06 FE650 to an FS. I own 3 FE 650s.
I'm cruising the 06 around town and through the streets to work so want to convert it for a while.
I know most of the things I need but would like to know if I am forgetting anything.
Supermoto wheels , rotors and gearing
Beringer 6 pot caliper , bro 12 master cylinder , brake lever.
48 fork springs ( I have ), 8.8 shock spring.
17mm offset triple clamps
Front fender and graphics that say FS650. Don't need sliders right now.
I'm sure there must be something else..

I'm on hold right now until I sell the green sticker 05. I am also interested in trading it for some or all of the supermoto setup in case anyone is interested.
Also looking for a full Akrapovic sysrem.

pollo
 
Looks like I would need to swap suspension too.
Fork radial much different along with internals.
 
I think you just about covered it. I would have said that the shock and forks are totally different but you beat me to it. you need my jetting kit of course f you are going to 'strike a pose' and pull wheelies like a great big adolescent again! :lol: :lol:

practice those doughnuts dude! :twisted:

regards

Taffy
 
Seems many people over the years have this question, since suspension is so subjective & personal leaving valving out of the equation right now,
1. what is the range of Ft & Rr spring rates for SM use with the 00-08 models that.
2. Who would you recommend for WP revalve / shorten forks & shock to FS specs
3. Old post rec' Sag Rr 90mm / 30mm static, Ft 35mm assume that's static ? 0.48kg Ft / 8.8kg Rr springs, 8.8 seems soft ?

As a footnote US supermoto getting started section, doesn't recommend shortening susp' but just lower front via triple clamps, I had built a KX500 supermoto which I raced at Loudon NH in road racing back in late 90's I lower the bike several times but found out < 1.5" worked best
 
I decided to keep my 06 FE650 as an enduro.
For street I am enjoying my 2013 Triumph Bonneville and commuting every day to work.
It is truly an awsome machine and I plan on getting a lot of miles out of it.

pollo
 
Well the process has finally begun. 17inch wheels, 17mm triples, beringer radial. Im waiting on a few things but have the front wheel on.
 

Attachments

  • yyuu.jpg
    yyuu.jpg
    94.6 KB
  • Like
Reactions: 1 person
My 650 is finally done. Supermoto suspension, FTE Beringer 4 piston caliper with lever and master cylinder, 16/18 triples, Doma slip on, DNA wheels with 3.5 front and 5 rear. Michelin Pilot power 2ct tires, supermoto fender and a few other little items and mods to make it work.
I offsetted the front wheel to clear the caliper.
 

Attachments

  • IMG_20141025_141332524_HDR.jpg
    IMG_20141025_141332524_HDR.jpg
    94.6 KB
Good deal...

What gearing did you settle on?

I'm running 17/47 for road use, 16/47 kart track.

Edit:
Make sure your tire clears the exhaust can. Mine was "hitting" the can and it broke spokes and cracked the rim at the dimples...8 of them.
That was with the stock pilot power, a narrow tire.

Pull the shock to make sure it clears or just rubs. A little rubbing is ok, hitting and not passing it: not ok lol ;)
 
Last edited:
I didn't know you could put a 17 sprocket on there. I'm running 15/40 now but I
might try a 38. I'm not riding track for now just back roads and twisties.The 160
doesn't rub the can which is surprisingly nice because there's only about 1/4 inch
clearance at the swingarm. I used spacers beforehand to put extra clearance at the
mount. The front tire does breeze by the fork tube on the right with the offset but
I've seen that before on several bikes. Its just leaving a little color. If that were a problem
I would just wet sand the edge of the tire an 1/8th. The forks I bought off eBay had rub marks
already.
 
What wheels did you use?

Hi Pollo,

Quite new to all of this and have recently invested in a 02' FE650 in which I was looking to do the same thing as you really.

I'm not great with the terminology, could you elaborate on what parts you used please?

Thanks in advance,

Fraser
 
FraserThompsom said:
Hi Pollo,

Quite new to all of this and have recently invested in a 02' FE650 in which I was looking to do the same thing as you really.

I'm not great with the terminology, could you elaborate on what parts you used please?

Thanks in advance,

Fraser
Click to expand...

Sorry I missed that. Don’t come here often. Currently have Behr Supermoto wheels on the 650. Forks are 2005 KTM smr450 as well as the FTE radial brakes.

Pollo
 

Similar threads

pollo
For Trade 06 FE suspension and triples for FS
Replies
4
Views
2K
Rainerio
Rainerio
P
For Sale Supermoto setup from 06' FS 650
Replies
3
Views
1K
proflow
P
H
For Sale FE570 supermoto for sale, titled and plated, north of Atlanta, GA
Replies
2
Views
2K
rkurdekz06
R
D
For Sale New husaberg parts fe/fs/fx 390/450/570
Replies
11
Views
8K
walshjuice
W
C
For Sale Husaberg 570 parts, subframe tank, Scott's damper, etc
Replies
26
Views
6K
Joe Willy
J

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions