- Joined
- Dec 1, 2011
- Messages
- 31
- Location
- Australia
Hey all, don't know if its been done before but here it is-
Its a controller knob from an electronics store super glued to the stock numbered dial on the stock mapswitch. It was a "meant to be" kinda fit, and the dials should be universally available.
The rubber housing has been cut to allow the knob through, and trimmed back so you can still feel the potentiometer click over between settings.
If you want to get fancy you could fit an o-ring under the knob with some silicone grease to waterproof it a bit better.
Anyway thought a few of it may find it useful !
Its a controller knob from an electronics store super glued to the stock numbered dial on the stock mapswitch. It was a "meant to be" kinda fit, and the dials should be universally available.
The rubber housing has been cut to allow the knob through, and trimmed back so you can still feel the potentiometer click over between settings.
If you want to get fancy you could fit an o-ring under the knob with some silicone grease to waterproof it a bit better.
Anyway thought a few of it may find it useful !
