Joined Jun 2008
1K Posts | 98+
Simi Valley Ca.
I have an aluminum fuel bottle in the works now. It is partially tacked together for now so I could check the fit.
Its probably around a 1/2 gallon. I will measure after welding. It fits nice and snug and I have it secured 3 different
ways. It clears the shock by 1/2 inch or so and if needed I will dent that area more later. I already dented it there
today. I will use an MSR fuel bottle top as you will see in the picture that I have taped on the bottle overly tall just to make sure it is going to clear. I thought about putting the top on the side as you see in the pictures but the one
on the right side of the bike I will go with because its tucked in.
Pollo
Its probably around a 1/2 gallon. I will measure after welding. It fits nice and snug and I have it secured 3 different
ways. It clears the shock by 1/2 inch or so and if needed I will dent that area more later. I already dented it there
today. I will use an MSR fuel bottle top as you will see in the picture that I have taped on the bottle overly tall just to make sure it is going to clear. I thought about putting the top on the side as you see in the pictures but the one
on the right side of the bike I will go with because its tucked in.
Pollo
