wrong

I was looking through the forum when I came upon this section, shouldn't the 2000 model bikes be with the 2001 and newer section? :? I have a 2000 FE400E so I have a little knowledge of this model year. My bike definitely has more in common with the 2001 and newer bikes than it does with the...

about three years ago i had this as a customer/punter. i got me an "all balls - lower shock bearing kit" and when i went to fit it i found that the two caps that press in at the end are for a 12mm bolt. so infact the kit is ideal as an UPPER SHOCK BEARING KIT". top bolt is 12mm. bottom...

hi guys, when my bike last came out of the garage it had a few starting problems... i found out that the idle screw was wound too far out and when i wound it in to where it would idle it started absolutel spot on! only thing is about a month on i had more starting problems and cured it by...

http://www.youtube.com/watch?v=ukAhlxl4hmM Might take a little while to load and for Aussies who can remember the Late Show from the early/mid 1980s it has overtones of Bargeass. Enjoy Steve PS, PC WARNING - Some BMW owners may be offended.

working on an '02 650FE and the flywheel marks are wrong by exactly the amout all the others were. i have yet to see a 650 without them being wrong. to recap: get the marks at the top of the flywheel. you have a left and a right mark and they are 5mm apart. you need a third line the...

Fork seals have been leaking on my 98 fe 600, so today me and my sweety had a date. While I slowly spread ... Hey Wait! This aint a porn site! :oops: Well anyway,the seals went in great,but,..I decided to go with 10 wt fork oil and held the oil down apprx. 125 mm.In the USA that comes to around...

while my wife is in early labor? :D :D :D :D baby (boy? Girl?) number 5 is on it's way!

hey just been out on the bike for a second time,since i bought it.(fe 501 .03)kicked up first time .oh yes rides to were we practice:" on the bike",very wet muddy no one round all by myself: ho well at least no one can laugh when i come off ! 2hours later and a couple of little spills...

My bike is very weird... when starting it cold I use the choke for 2 kick. then kick it without choke a couple of times and it starts. thats fine... But when riding it and if the engine stops, sometimes it is almost impossible to get it starting again. I write sometimes because 7 of 10 times...

If purchasing a set of Acerbis rally pros, open the package at the store and check the screws that hold the secondary clamps to the inside of the bars (4 of them) I didn't, and will now have to drive back an hour for the correct ones since mine were packaged wrong. (one size too small) Might...

Hi, I have started to dissemble my engine. When I splitted the engine I found that the right hand main crankshaft bearing is a roller bearing, Japan EC NTN 206ECS46. Shouldn't it be a ball bearing? Didn't checked the left hand due to lack of time but I assume there is a roller bearing as...