This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

working

  1. T

    speedo stopped working all of a sudden

    does anyone know of any common problems with the original speedo on a 2005 fe 550, one ride it worked then next it didnt even turn on, it never got a large amount of water on it so i got no idea what else it might be
  2. N

    starter is not working

    My starter will crank the motor only once or twice then it will free spin it usually never starts, even when is worm. its been getting worse and worse tell now it wont start with the starter at all. is it the sprague?
  3. M

    Rear light not working

    Hi all, I'm hoping someone can help - My rear light on my FE550E (2004) wasn't working, so decided to check my electrical connections - even with the engine running I seem to have no power heading there. I've been told it could be an earthing fault, but don't know where to check the connection...
  4. A

    Horn not working - Help please

    OK - new thread as I got wronged for adding to an old a while back but the info contained is relevant (ned) but I take your point... viewtopic.php?f=5&t=5512&p=113490&hilit=horn#p113490 There is also a thread called No horn power that I've explored too - interesting & may be relevant but ...
  5. R

    New 2011 570 FS head light and tale light not working

    Brought home my new 2011 570 FS last Saturday and have spent time this past week adding heated grips, fan, and a map switch. Got things back together and now have no head or tail lights. Map switch and fan plugged into the factory provided plugs, heated grips hot wire tapped into an unused...
  6. I

    2009 fe570 headlight/taillight not working.

    just bought an 09 fe 570. it didnt come with the headlight and taillight so i bought them seperate. \the dealer told me that they would plug in and work. False, no luck. Anybody know what may be the problem? \all the fuses are good, wires connected, bulbs good, lots of voltage etc. Any help...
  7. D

    05 FS650E Starter was working then... click

    The Battery is new and fully charged. When I pull the starter and jump it it turns but not as fast as I would have thought. Turning by hand the starter has a lot of drag. Any ideas? Thanks. Donald
  8. B

    Computer fans fitted and working fantastic

    As per this thread http://ktmtalk.com/index.php?showtopic= ... try3220416 Finally fitted them up and got a thermo switch (Tridon 95-90 deg) tested it today and it works great, 3 position toggle manual/off/auto on The ballbearing fans fitted to both sides really suck the air through and out
  9. C

    Clutch not working

    After a complete rebuild of my FE501 '03 the engine is running fine again but the clutch doesn't seem to work. After the first start-up it worked but no good. Then I went out for a short drive to see if the engine was OK and the clutch stopped working. Looking through the oil fill cap you can...
  10. H

    Speedo Working Oddly

    Today the speedo flashed off, and when I turned it back on it had some sorta of code that read "na 15" or "ra 15" Something like that, the clock changed to be about 5 hours ahead, maximum speed changed to some other figure like 87km/s, trip meter I think is the same cannot remember, I know...
  11. B

    E-starter not working.

    My E-starter is not working, checked all connetions and are all fine. Could it be a blown fuse, if so would it affect anything else. 08 450 fe, only 3 months old
  12. R

    How to test a speedo is working?

    Hi Guys Firstly apologies up front - I'm sure this is listed somewhere on this site - but having looked through the owners docs and searched the forum - I just can't find it... So - having got my FE400 E running now, I'm wanting to get the digital speedo working. It was working when I...
  13. F

    Brembo radial hand-break not working

    Hi, i have a radial hand-break that comes all the way back, into the hand-grip. slowly, over the course of the last three months, it has lost it breaking ability. i bought this along with a KTM supermoto racer conversion kit last december from KTMcycle Hut . this didn't start happening until...
  14. Johnf3

    Robbie Jenks working for Husaberg?

    I saw over on KTMtalk that Robbie Jenks was hired as National Sales Coordinator for Husaberg in the USA? Can anyone confirm? The post said he will also be racing selected events. If this is true, it should be a good move for Husaberg. If he actually does race, depending on the event...
  15. Berg650

    Engine Shortcircuit not working

    Hi all first post for me, ok i replace the original speedometer in my 02 Berg, the old one, for a new digital Trail Tech ENDURANCE an the engine shortcircuit stop working anyone knows what need do for keep the Trail Tech and the button work. I need reconect any cable
  16. cookeye

    Hribman kokusan still working?

    My sem has given up, time to think about your conversion. Is it still ok? cookeye :wink:
  17. tolga

    Digital odometer is not working properly.

    Hello, My digital odometer on my Husaberg FE450e is not working properly. When stoped (after the rides while it is parked); it turns it self on and off and eventually kills the battery. When riding; it resets it self couple of times during 70 km ride. I don't have any signals or tail light...
  18. muckybill

    Working off the Christmas feast

    Trying to get some speed up but the xmas pud is slowing me down :D
  19. bigbob

    I hate working blind on stuff I don't know about

    was using a pencil to find TDC and then on the third try, the pencil broke off and left a chunk down in my cylinder. Now I have to pay a real motorcycle mechanic all sorts of money to remove my head and get that pencil fragment out of my bike. DAMN! how the hell is a poor weekend warrior...
  20. S

    Is the engine working Ok

    Hi,have a wee question regarding my engine,i have a 2003 Husaberg 470 which has been converted for road use.While doing some roadwork on the way to the local practise area the engine feels a little tight as if it is struggling.Is there a problem, it is a little concerning as i dont want to cause...