wiring

I have been looking to make my new Hussa FE 450 Road legal, this is the american version so it did not come with the turn signal switch on the handle bar. It does have the low/high beam and horn switch but no horn. Also has no ignition key. I have been looking at the Tusk Enduro wiring harness...

390/450/570 wirriring harness need a wiring harness asap.for either 390/450 or 570

Hi all. I have an fe450 12 mod and it's starting to have a few little electrical issues. The bikes done over 440hrs with no problems up until now,they have been all bush work so it is bound to happen. I pulled it apart and found a few decent rub spots on the wiring loom. I could go...

Ok, first off I am a newbie to the Berg family and this forum. I have a '09 570 that I am trying to add some blinkers, fan and possibly some other things. I picked up the repair manual and the owners manual wiring diagrams but they are not labeled. Does anyone have a labeled diagram of the...

Hi everyone! i bought this husaberg the other week and the wiring is a bit of a mess, does anyone have any pictures to show how it should be wired up? i assume something isn't right as if i touch the positive up to the battery it just sparks, there's also some damage to the starter, is that...

Hope somebody can help. I had to solder the 4 red and white wires in the wiring harness under the fuel tank . All went well pump primed everything good ,started up no problem . I thought i would make sure it was a good soldering connection and soldered the wires well.In doing this i did not...

Hey guys I've been rebuilding a fe650 over the last few years and it's almost ready to start up, except one thing. There are 4 wires that plug into the ignition switch that I cannot find a diagram for. The switch is marked 1,2,3,4 and the wires are YL/RD, RD, OR, BR Anyone able to help out...

Need to wire in a Montana pretty quick, am I right in thinking that there are spare accessory wire behind the headlight that I can wire the Montana to? In the little plate the runs across the headstock that locates some of the connector blocks, I've found a connector block that sits...

Hi guys, I have a 2013 husaberg TE250 and I'd love to add some addons to make it street legal in NB Canada. Things I'd love to accomplish with the Tusk products are: -Hi/lo beam headlight -horn -rear brake light activated with foot brake There *is* *this link* here that let's me...

Hi All, I just wondered if you could help, I have purchashed the switch below to improve on the very poor standard cv indicator/light switch that broke first time out! I have wired up and the lights and indicators to the new switch which work great :)...

hi all im new to this forum but i thought id share this with you guys i brought my berg 4 days ago and i have pulled her down to give a once over apart from all the usual mods and problems i have found another one its the wiring that passes near the shock absorber :mad: it Nelly rubbed...

I got this bike as a basket case and literally everything had been stripped from the frame. I think I have all of it and am trying to get it back together. After putting the motor back together I am stuck with only engine service manuals I could find and no wiring diagrams. I have most of it...

Gday Im new to this site (yes been to intro) and apologies if this has been covered previously I am after a wiring diagram and/or a workshop manual for the 390FE Reason being the little fan at the radiator seems to have **** itself and Im thinking fuse,relay etc before fan-something needs...

In the middle of a rebuild I decided to cut apart my harness and pull out all the BS as well as getting rid of fuses and replacing them with aircraft style Circuit breakers... Lol wish me luck!

While I have my motor and bike torn down Im going to thin out the wiring harness. I did this on my 500 XCW with great results. however I don't have a pdf manual for my 570 so I am unable to see what wires I need to keep and what I can cut and cap. Could some one please provided me with (or...

Finally installing grip heaters (KTM branded ones) on my 2011 FE570 Have done some research on where to get power but there doesn't seem to be a consensus Anyone willing to share their experience?

Hello, my name is christian and I life in France. I bought a FE 600, but the electric bundle was cut. What is that somebody would have the plan to repair it? I thank you

chasing a diagram/info for the charge circuit of my bike. have taken out the battery and pretty much all the stuff for lights etc. but still want to run the fan off a manual switch. at the moment im not getting any voltage after the rectifier. I also have a spare yellow wire from the charge...

hello.. My bike is a husaberg 600 elduro 1996 mod, with 2001 husaberg 650 engine in. The former owner did this engine swap, engine stator and "some" wiring. :eek: on the cdi it stands: icu/DEE 56 855 191 01 25021702 and has a...

I could really use some help with the wiring on my 92 501 berg the bike is a stolen recovered and the wirings been trashed .I intend to just have a simple ignition system with a kill switch .the question is which colour wires from the stator do I connect to the coil also what is the little...