weep

hey guys, i have an 07 fe 450 and on my last ride i noticed that there was quite a bit of oil coming from what i assume to be a weep hole behind what i think is the water pump housing???? its just above the oil leavel window. i looked at the oil level in the window and it was low so i toped it...

I have an 02 FE501 Husaberg that I bought this summer and has given me no problems what so ever, until recently. While riding at high altitude (around 11,000 ft.) I stopped and turned the bike off to admire the view, when the hose from the radiator to the engine blew off and leaked all of my...

I think i have read most of the topics on this subject but just wanted to make sure i was on the right track. I have oil leaking from the weep hole on the water pump housing. If i am correct this is due to failure of the 'O' ring on the water pump shaft? I have read about oil level being very...

The oil weep hole (red arrow) on the clutch cover never quits weeping oil and making a mess on the side of my bike. If I ride an hour, it will leak for the entire hour. Two hours, it will leak for two entire hours. And so forth. I have put 1000ml of oil, but the bike has been sitting open for...

Just for the sake of noting progress, I installed a new water pump seal over 20 hrs ago, with a new bearing/seal o-ring set-up. The new part# seal seams to work better than ever! I also red loctited the bearing outer race to the cover. At 111 hrs on the '06, it shifts and runs better than new...

On my 1994 FE 501 after replacing both sets of seals and seal housing on the cam shaft and both bearings when run for 10 minutes I have water pouring out of the weep hole. Any idea of what else I can do to fix this? Please help me! Thanks

Has anyone tried fitting a slightly thicker o-ring on the waterpump shaft to alleviate the oil leak from the weep hole? I picked up a few different sizes and am going to try this. Brian

so i got 10 hours on my 03400 now. bought it last month with zero hours. is the position of that weep hole a design flaw? i got some oil leaking out now (no big deal - just a few drops) but that weep hole is pointed in a direction that is perfect for catching sand off the front tire??? Does...

I had an oil mess after each ride on the left side and looked everywhere except the weep hole (due to my lack of Husaberg knowledge, I have to confess). I cleaned everything up good, put everything back, bike started fine, easier than before thanks to valve adjustment, but now I realize the...

I just recently purchased a 2002 Fx470E. The problem is as follows: There seems to be a water leak from the weep hole. Im thinking it might just need a new seal but I have read other forums about this problem and maybe should replace the bearing inside along with o-rings. Im somewhat new to...

Hello guys, I have a leeking problem from the weep hole at the waterpump as well. My bike is a 2004 FE501e with 16 hours on it. During a three day off-road trip my engine overheated and started boiling. Cooland squirted out of the weep hole, but from that moment on coolant (not oil)...

I have a 2005 550FE. It's done about 400km. I know the weep hole leak is a problem on earlier models, but i thought they fixed it on 05 models. To date the dealer has fitted 4x shaft seals, 2x bearings, 1x clutch cover plate. The problems is still not fixed. Any thoughts or should i just get...

Gave my bike (FE450e) a good wash then went for a ride into town to get a sandwich. On return and parking up i noticed a small leak from the weep hole in front of the water pump. Done a search and read some posts on this subject. It does not look like engine oil (Motul 330v) as this is a light...

thanks to all who gave me info on how to fix this weep hole nightmare. success at last :D

Fellow Husaberg owners, I have a (pain in the but) oil leak coming from a weep hole. The weep hole is located at the 9 o'clock position of the water pump. The weep hole is in the side cover ,not the removable water pump cover. No oil inside the water pump. No other leaks on the clutch...

I noticed when washing the husaberg the other day that there was coolant around the water pump weep hole. Is this normal, and if not, what needs to be done? Thanks EuroEnduro