time

So im picking up a GasGas in the morning, 2010 ec 300. I really dont need the hassle of 2 bikes, but im not sure if i can sell the 550. 5 years is a long time. i feel terrible. What to do?

Hi all, Electrical problems with my 2012 FE390. I've recently done some electrical work and now every time I switch on the high beams the fuse blows, low beam works just fine. I've only made some very minor tweaks to pickup power for a Trail Tech Vapor and Montana GPS cradle, which I have...

I'm literally fed up of this, 1 year ago I had yet another mid life crisis and decided to try something different so I bought a new FE450 (2012), in the last year I have to concede I've hardly used the machine but I'm trying to rectify this now. Riding hours currently stand at 11 :oops...

Hello, I have a small problem that my free wheel hub (800.40.025.000) lost couple tooth for the second time during last 40 hours, so I have two questions: 1. How to avoid such failure in the future? 2. Can I remove free wheel gear with all components and use my bike with kick starter till new...

I was looking in the manual and Husaberg has the FC550 listed as a motocross bike which usually only get run approx 40 minutes at a time, I like to trail ride for hours with groups of people. of course we stop from time to time for water. Will it hurt to run this bike for long periods of time...

So I'm new to the bored and new to the burg, i've always wanted one and one showed up on CL and I'm gonna pick it up later this week. I checked it all out and seems to be good, little weird kicking it over on the left :twisted: but i can get used to that. I've had Yamaha yz426's and 450's my...

Hi guys, time to pull the motor apart as it is making some horrid metallic grinding sounds like a collapsed bearing :( , so I'm just after some advise on what to look out for and perhaps what are some good upgrades that i can do while the old girl is apart, was thinking about maybe going the 650...

Hi guys, just doing my first valve check and ran into a possible issue... Basically, i couldn't get the feeler gauge under the pad? and valve, but i believe part of my problem was the feeler gauges i'm using are just to 'wide'. Looking @ the pic below, that feeler looks to be much more...

I've had my Fe570 over a year now and have been playing with things as and when I ride it. I've gone up to .46 springs on the front and 7.6 on the rear, although it's better i'm going to try a 8.0 rear spring soon as I feel it needs it. I did a race with a MX section and the bike bottomed out...

Not sure what I did but it would appear that I screwed up and I'm not sure how to fix what I did. Bike - 2006 fe450e Original problem. Water was coming out of the hole on the impeller. So I got both seals, pulled the left side of the case and replaced them. After reassemble when you hit the e...

Hi all, my battery seems to be loosing charge over time. I wondered whether I had an alternator problem (i.e. battery is not getting charged while running)? Is there a method to check this? Maybe coincidentally, my front lights have just stopped working too (have an Acerbis diamond headlight...

:cheers: All I have to say is WOW. I just installed my LFX14L2-BS12. I have an 08 Fe450. This battery almost doubles the cca and amp hours of the yuasa that comes standard. The new battery will crank and crank and crank my engine over until I fear i might overheat my starter. it also makes it...

Hello people, I've posted somewhere else in the electrical section on my continuing woes with the inadequate e-start performance of my 2002 FE400e... in short, it didn't e-start hot or cold despite all the suggested starter upgrades and perfect mechanical condition. Many modifications later I...

Hi all, I'm from Australia and just bought my First Husaberg a 1999 600FE. Bit rough around the edges but after 2 days in the shed its up and running again-first time in 2 years and seem to be a nice bike ridding it around my paddock. Noticed its hard to start (previous owner also complained of...

HELLO, I just bought a used 1997 FE400 and it's time to do some tuning. I have an owners manual but it doesn't give much detail on maintenance and repairs. For instance I'm not sure how to disconnect the clutch cable to get at the oil filter. I'm not sure how to check the oil level either...

Hi friends: My fe450 `09 has around 150 hours. My last 20 or so hours of riding, I´ve heard that that the water inside the radiators is constantly boiling. I don´t know if its a problem of the engine (which is heating too much for any reason, maybe soon to change piston and rings?) or it´s a...

Been here a couple of years and have developed a love for these swedish machines. I've only ever rode in supermoto trim on the road but nothing I've riden has come close to giving me as much fun through thye twisty Worcestershire and Shropshire B roads. I've completed 2 rebuilds within this...

I finally stepped up and picked up a '10 570 from Mark at SOS. When I picked it up, we went to fire it up and load it into the truck and it took quite a bit of spinning to get it started, but I thought well it's new and probably has old gas in it. First thing I did when I got home was removed...

Hey folks. I am still alive, still working all the time. I woke up and needed some retail therapy today so I bought a Gas Gas EC300...I'd upload a picture but the website is complaining too much about file size and pixels so I am going to just leave it to your imaginations.

Hi All, I have recently took the plunge and bought a Husaberg. More specifically, I bought a leftover dealer demo 2008 FE450. I hail from Regina, Saskatchewan, Canada. I was always interested in Husaberg once I learned of them in Highschool from reading various Dirtbike magazines. I knew...