tall

I'm looking for a 70 degree compatible seat with or without foam and/or cover, the shorter the better. If I can just get a pan only I'd be happy. Also wondering if the '10+ TE pans are compatible. I live in Colorado, USA. Thanks, Ryan

I'd prefer the complete seat so I don't have to install/staple to my base, but will take just the foam and cover if that's all I can find. My cell is 970-820-9818 if you want to text me. Thanks Why does the thread reui

I'm 6'2" and the bike has always felt very cramped for me. The pegs are much higher than I was used to on my old bike so this really put a lot of pressure on my bad knee. Seriously, I limped around for a week after getting into some frequent Summer riding just from having my knee bent so...

Sold. - Husaberg FE570 Factory Tall Seat 2009-2011 Factory tall seat in great shape - no tears or excessive wear. Off a 570 (since sold) but believe it will fit the other FE models from 09-11 $100 plus shipping

Does anybody know where I can buy a complete tall seat for my 2014 TE300?

I stumbled across HTMOTO to put together a tall seat for my 09 FE 450. HTMOTO is located in Anaheim, CA. They have seat covers for all bikes - street, cruisers and moto. http://www.htmoto.us They did not have a pattern for the seat cover for the 09-12 390-570’s. They used my seat as a...

I've had my bike out for a couple of rides with mates now and it struck me how much they stand where I sit. It then occurred to me that the reason I sit is because I'm too bloody tall for my 650 and end up hunched to be able to use the bars. Issue: I have a Scotts steering damper on my bike. It...

Trolling thru all the info about taller seat options for my 2011 FE570.......how much taller is the factory seat compared to the standard one...and is it much firmer....???? I find the standard one to be a little on the 'plush' side. Is an aftermarket one a better option...????? Ideas...

Hi, I know this has been hashed about a bit in the past, but can anyone recommend a decent tall soft seat? I'd like to get the entire seat, not just the foam and cover. It's for a 2010 FE450. or Anyone got one kicking around their shop they want to send to a good home?

I am not too tall, 6-2 with a 34/35 inseam I am having an issue with my toes hanging lower than the brake pedal when I am sitting up in the seat. So far I have installed the Husaberg tall seat and adjusted the rear brake push rod to lower the pedal as far as it could go. I still need to lower...

fitted the factory tall bar mount kit two months ago and in the first fall the bent the corners up on one side and in the second they ripped all the thread out. then yesterday they ripped the other thread clean out. TURNS OUT THE BOLTS ONLY THREAD INTO THE FIRST PART OF THE HOLES...

Im thinking about purchasing the tall seat for my '10 570. Is it worth the $139? How much rise in seat heighth? 1"? Thanks for any thoughts!

Hi, Does anyone know where I can get a tall seat for a 2011 570

I am (was) 6'4 245 lb. 53 and I have decided to buy a new bike and set er up for trailing. I have a 2004 550 FE that I bought new and like the motor on, but, I didn't put the $$ into the suspension to make it right. Even so I was thinking of raising the bars and dropping the pegs to make it...

Hi all i have fallen in love with the 011 390 and still have not felt one yet. Sat on this years and it seems tall i'm 5.10 and i am on my toes to touch the ground. Springs and valves will be done to suit my weight 72kg(dry) and was after some advice about lowering it some? It will be doing bush...

for a 08 fe, anyone, must be new or as new.

Hi everyone, I am 6'6" tall and ride a 2004 fe550. I am finally going to mod my bike to actually fit me this year and am looking for some advice. I was going to lift the bars, lower the pegs and maybe get a tall seat but im kind of stuck on a budget. What do you guys think I should use for a...

i've been assessing pistons and dimensions for some time and as i sell stuff i have had a problem i couldn't cure till today! basically, all the old pistons from the 470, 550 and 650s have a deck 12.7-13.3 above the gudgeon pin. the 2004+ 550 shares the 13.3 measurement but the 450 is...

I am looking at an 05 or 06 Berg 450. I am 6'4" and I am concerned about the cramped peg to seat height. Any tall Berg riders out there?

I keep reading about the tall seat option for the 09 Hus...how many inches taller is it than standard, no one every seems to say!