swing

I have a 2000 fe400 and I need a swingarm replacement I found one from a 99' will it fit?

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit.

Does anyone know what bearings and seals to use for swing arm in a FE400 96 and FC600 99? I have been trying to look in older threads without success.

I need a swing arm chain protector for my 2002 Husaberg. The part number is 120 052-03. If you are aware of anything close I am happy to make mods to get it to fit. Thanks!

Had a bit of machining fun yesterday along with the compulsary ********* stories and some "Lussekaka" (Swedish saffron kake, namnam). On the shelf was this swingarm that was in good nick but it was for a narrow cased KTM 450 SX -08. This is the same exact casting as the 570 but too narrow to...

I have a 99 FE501E looking to find out if the 2000+ models are still Non-linkage suspended. If they are PDS can you swap a newer swing arm on a 1999 model? My reasons are to upgrade the chain guide and availability of chain glides for the older 1999 swing arm. The glide is discontinued and I...

Can anyone tell me what swing arm bearings come in my old 94 FE501? I'd like to buy them before pulling it apart. Thanks.

just thought I'd let you klnow that I am having the swing arm polyurethyne protector around the front produced for both the very old and just the old Husabergs! 12005201 which was available from 1989-2000 (all models) 12005203 which has just gone out of production was 2001-2003 (all...

Does anyone know what is the difference in the swing arm bolt between 2004 and 2005? It is possible that this from 2005 is stiffer?

Between the needlre rollers in the swingarm there's supposed to be a tiny spacer. When removing the old bearings one of min disappeared. Has anyone got one to spare?

I blew out the swing arm protector (H12005203)on my 2002 FC470 which in turn wiped the blue frame protector on the right side (16017101). Seems both pieces are now unobtanium from husaberg.com/KTM. Any one have a source? The swing arm protector seems to be a simple strap of plastic type rubber...

G'day Husaberg Guru's!!! Bit strapped for cash lately and found a cracking deal on a new swing arm, the old has a hole in it, when I was riding SM a nylock nut came off and shredded swing arm and shattered my rear sprocket... Anyway, new swing arm found for a fraction of the price, after a bit...

After a day out at the local mx track the other day - noticed the tell tale clunk of a dodgy bearing when I pulled the back wheel over from the top. I've only just done the wheel bearings so it's probably not them... It's not a big clunk but there nevertheless. Can't really see where the...

Do I need a press to change the swing arm bearing? http://www.bikebandit.com/2010-husaberg ... #sch656444

Looking for a catch tank to fit behind the swing arm, I've seen one on a ktm but can't find one! Any body know where I can get one in the uk?

Are they the same in length? I was told they are some 30-35mm shorter?..........I ask this because My 04 FS was converted over to FE status by its previous owner. He kept the Fork sliders (replacing the bottom caps to suit FE Brakes), and rear shock Due to he was a fare bit shorter then me, and...

Hi all My 04 needs swing arm bearings Is this job doable with only a vise and no press any tips Thanks :D

I just got back from an 80 mile ride and the swing arm is getting looser every time out. The nut is tight and it looks like its only the right side. Is this going to be a pain in the *** ? Should I deal with this sooner than later ?

Ok Boys, Just spending Sunday morning doing some more set up work on the 550, I'm taking out the swingarm to check / grease bearings etc...I've pulled the hex head bolt out of the bottom mount of the shock \ swing arm area and there's no doubt a pin that needs to come out in...

hi guys love my berg to bits but its looking a bit tatty now so i have new graphics and plastics! put them on the bike looks great getting the new seat cover on this week! the only thing is the swing arm looks crap, just wondering if i could fit a newer model swing arm? mines a 2000...