swap

Hay there all looking if it's at all possible to change my 550 which will need a rebuild soon to a 650 since they are easier to find and to get parts. plus the extra power wouldn't go a stray . Just wondering ho much was involved in the swap if it can be done that is it a 08 Fe and I pretty...

I have a 2011 FE390 that has a Rekluse Exp Pro auto clutch in it, along with billet outer cover. I'm looking to go back to a stock setup, so I'm looking for someone who is interesting in trading (plus $300 cash on your end) their stock components for my Rekluse setup. I will need in exchange...

FE650 engine swap into older husaburg 97 501 possible? Got a Ca plated 501 that is tired & I am tired of kicking it. This would be a nice solution vs rebuild and live with kick starting. The extra 30% power...Bonus! Wondering if it drop in easy mod or don't attempt Anybody know...

Hi guys, engine in my fe400e 2001 is died but frame is in the brilliant condition. I have a possibility to buy a better engine 450cc from 2005. My question is "what else I need to the conversion"? Do you know if exhaust pipe from 400 2001 will fit to the later 2005 engine with new cover? Can...

I have a 1996 400 Husaberg front Wheel. Will the 501 front wheel from a 1999 Husaberg be a direct swap? They look the same. A little help before I pay for long distance shipping. thank you....sl

Hi! My 2001 model Fe650e engine needs rebuild, which i can not afford at the moment. I have a 2004 Fe450e enigne, that i want to put in the 650 frame, so i can use the bike in the meantime. The problem is that the eletrical wiring is not the same, and i dont have the wiring harness from the...

Hey all, was wondering if it would be viable to swap out a 98 Fe501 engine for a 350 around the same year. Reason being, I lost a water pump seal on a long ride and consequently washed out all my bearings / Engines pretty much done for. However, I do happen to have a 350 (engine only) in near...

hello guys, had great success in rebuilding my 1996 fe600, rod it all winter, it even started in the -10 Celsius ranges??? only problem was I was a ***** and used to much throttle for to long and pit the rod through my bottem end now for my question, I can get a used 1999 bottem end case...

Hey guys, first post! Im going to look at a 11 FE570 today. 3k Miles. DIRT CHEAP. Catch is that at some point it was a theft recovery and salvaged. Salvage title, but the seller doesnt have it. Checks out on vin checks. My plans are to tag and SM it. I've got a lead on a 09 390 frame w/...

Hey guys. Picking up my first Berg this weekend. It's a 2011 Fe570. I have several KTM Rfs bikes in Supermoto trim and I plan to swap the dirt suspension and wheel set up to my 525exc and the Smr suspension off my 525 onto the 570. I know the forks and wheels are a direct swap. But will the...

just finished the basic first testing on my 99 fe400 drz ignition swap! starts better than new,timing advancing, great throttle response! really quite a simple swap! i'll try to post picture soon!

Have had my berg now for a few months 1999 FE501E. I am educating myself on all that is "BERG" wished I would have bought it back in 99. Maybe then I could get more info. I know many new KTM and Berg parts are interchangeable I have also learned many of my new parts I am ordering have KTM...

I have a 99 FE501E looking to find out if the 2000+ models are still Non-linkage suspended. If they are PDS can you swap a newer swing arm on a 1999 model? My reasons are to upgrade the chain guide and availability of chain glides for the older 1999 swing arm. The glide is discontinued and I...

Hey guys, I have a 2006 FE 650 with factory rad fan, and have found a full set of black plastics and tank off a 2005 at a reasonable price. I really would like to move to black rather than the Yellow and Blue mismatch. I'm 99% certain that all the plastics and tank will bolt on without issue...

Hi All, I'm a new to Husaberg rider. Recently purchased a 98 FE600. I grew up riding dirt bikes in NSW Australia, but have been more in to street & dual sport bikes for the last 15 years. I finally came to the inevitable conclusion that there really isn't a dual sport bike that "does it all"...

I managed to seize my 550, it was a total loss, so I swapped it with another 550. When I have come to fit the clutch slave cylinder, it doesn't operate the clutch. I have bled the system, but the lever is just solid, as though the actuator is pressing against something solid. I have tried...

Hi Everyone, Quick question, has anyone swapped a set of KTM 640 LC4 forks onto a 1997-1999 FC 501 before? How difficult or easy is the swap, any advice welcome!! :) :?

Managed to break both clutch and front brake master cylinders last Sunday. Have sourced a replacement for the clutch (9.5mm bore) but struggling with the front brake. Anyone know which late model KTM's have a m/cylinder with a 12mm bore? I''ve been offered a couple but the vendors have no idea...

1998 FC400 with bad stator black/green 165ohms, Black/red 200 ohms. Can I swap in a 2001 FX470E stator? Do I need the flywheel as well? thanks

Guys, need your advice here. I sold my 2008 FE 450 to someone who's a bit larger at 185 lbs and I am looking at a 2010 fe 390 with 106 hours on it. Would I be able to swap the suspension setups between the 2 bikes? My 2008 fe 450 had a Full factory connection setup with 20mm spacers fork/shock...