suspension

Hi guys, probably gonna get shot down for askin basic questions but hey, what the heck :bounce3: Ive got these measurements ... 630 on stand 552 race 600 static Need to get towards 85 -100 race which will obviously alter static, but i wondered if it was possible to not have enough tension...

I've mentioned these in the past, and a few members have been along, or got Frank to run one at their place. Frank's CV includes everything over the years, and he currently has 3 2009 Oz roadracing titles and will likely add to this in 2010. He has enduro, MX and short circuit in the bag too in...

I installed my friends brand new 72 250 shock spring in to my bike with 10 mm of preload. Feels good on the rough stuff and wheelies but the front has gone to ***** and I cant tip it into a corner with the same confidence. Also there is a terrifying headshake when braking in deep sand that wasnt...

want to put on some 03 ktm mx tech revalved suspension, I know the front will bolt on. any idea if the rear shock will bolt on as well. thanks, Edwin anything to make this bike handle better,like changing out the triples to 14 mm. thanks, Edwin

well having sent my suspension off for some sorting the bloody courier company has gone and lost them on the way back. i'm actually surprisingly calm which is down to the fact that the reputable suspension tuner has already said. "oh well if they've lost them i'll be buying you new suspension"...

Any suggestions for husaberg suspension specialists ??? I need springs for my weight.. I am 6'0 tall Weight: 210 Pounds. Thanks.

gone back to the std 08 forks and shock on my 08 450, been using wds for 2 years so need a bit of advice on setup. the forks are std 08 with 5.0 springs fitted, the shock is std with the hardest Ti spring you can get fitted, think its a 92, i'm 6'5" and about 135kg fully kitted up(big) ride in...

I have a 09 FE45o, i'm 6ft and 90kg and about 100kg (220lb) in bike gear and want to get my bike revalved and resprung for my weight, riding style and conditions i ride at. I have spoken to 2 reputable suspension tuners in Sydney (i'm in Newcastle) and both have conflicting ideas on what will...

Hey crew, I'm interested in some input on my FE 550... a. So I'm up to ride four...and love it. by some peoples standards I think I've got the forks on the gentle side of plush...but I can hit big shyte at speed and stay on line so I'm happy with it for now.. b. We...

Has anyone ridden both bikes and is there a big difference between these 2 years?

Hi, I'm 82 Kilo without gear do you think a 76-250 spring would work on my bike. I could have some second hand SXS forks,wich springs do you think i need in them,in the manuel they talk about 4.6 in the standart forks... Are the SXS forks really better than revalved standart forks...

09 FE450 (EU) The problem: Rear shock bottoms too easy, bouncing like a rabbit. (Looks funny though.) The goal: To set the suspension good enough for motocross, without sacrificing too much of enduro capability. To my understanding setting all clickers too tight is going to cause...

My header pipe touches the rear spring on my 09 570. I've tried twisting the header at the join and spacing the muffler, but it still touches. The dealer told me that they all do it and it is not a problem. It only just touches, but it shouldn't.

Hi there you all friends in Husaber.org: I don´t know who´s idea is this website but I love it. I´ve been reading de page since January (date which I bouth my new Husa FE450 2009). I am from Ecuador-SouthAmerica by the way. This is the first time I post a comment or ask for help...

I need to adjust my suspension. The forks are way to stiff. What is the best way to do this for a 2000 FC501? Thanks, Daniel

IVE JUST GOT A 09 450 AFTER THE 99 FC501 THE BIKE ITSELF IS WAY BIGGER I WEIGH IN AT A FEATHERING 60 KG ( 132 POUNDS) AND HAVE STANDARD SETIINGS. I'VE NEVER REALLY PLAYED WITH DAMPER/PRE LOAD SETTINGS CAN ANYONE LAY SOME SUGGESTIONS ON ME?

in my manual for FE550 / 2004 3 types of WP rear shock and 3 types of front forks are described. xxA01, xxA02, xx A03 but how can I tell which types are on my bike. is there any identification on the suspension somewhere? help is apreciated! greetingz from Nl klaas

Hi I'm looking for a world class Ohlins suspension tuner, doesnt matter where in the world the guy is. I just need the best I can find to set up the suspension on our Dakar bike. Any help or recommedations is greatly appreciated, thanks

Checked the preload as standard. Came with two 10mm preload spacers. Put another 10mm spacer and backed off the fork cap preload adjuster to 1 turn (leaving about 8mm more preload). Bike handled a lot better....., but what would be the maximum preload before coil binding? It was hard to get...

Has any one had the front springs cut down & rear shock lowered???? How much did you lower it . How do you like it . How did it effect the handling Thinking about lowering my FE450 - Suspension guy can lower it 1-2"