supermoto

Hi all, proud new owner of a FE 570. been looking around and seeing all sorts of different info. can any one point me in the direction of a good rotor + bracket combination for my front 17" when i have streets on staying with stock caliper? 310 or 320, ideally don't want to break the...

hi can I fit an ignition switch to my 650 supermoto for added security at the moment you can just jump on it and ride or any other ideas for immobilising it

can anyone tell me best engine oil to use book says either 5w/40 or 10w/50 fully synthetic oil will any make be ok like Castrol magnatex or another good brand any ideas please my bikes a 2004 and I don't want to blow the motor also whats a good oil for the foam filter thanx mark

Hello! I am currently looking for some supermoto rims to put on my Berg. And I am wondering which rim sizes you are running? I dont want to get a rim that will be rubbing against my chain, as I've seen some bikes that have that problem. I see you can get front wheels at 17x3.50 or...

Hiya, Those of you with supermoto and 21/18 wheelsets, how do you set up the suspension so it steers decently with each? As far as I know, then if the forks and rear sag are set up for the SM tires, the offroad tires will cause the bike to feel heavier steering, and vice versa. Is it...

I have been looking for a set of supermoto wheels for my Fe570 all year and every time I find a set the sellers are always asking these outrageous prices. I have people asking $1,500-$2,000 for a set of wheels. Ether Warp 9's, Excel, or Behr Only ones I find for $1,000 or less are all...

Hi guys, SM wheels? I have a 94 FE600 that i just picked up. It has been plated and in currently running DOT 50/50's on stock wheels. Looking for some SM wheels to have some fun on. I have searched the site and i have come across some FE600s with SM wheels, but just photos. Does...

Hello, I have a Facebook group called San Diego Supermoto's Only. I'm accepting all people with a Supermoto for all kinds of Supermoto related discussions. I'm the only one with a Husaberg and would like to add more so if interested request to be a member and you'll be in. Thanks, pollo

Looking to put a set of sticky's on my fe450. Not sure what sizes to run, any help would be appreciated. Running stock excel rims: Front tire: 90/90-21, rear tire: 140/80-18.

I just bought a new counter shaft seal kit "to fix some leaking oil" and would like to swap out the front sprocket at the same time for the SM setup. Was wondering what gearing everyone was using when they covert the Fe's? Also, like I said I bought this Kit P#"00050000941" but it comes with...

Hi to All, i am new here and my bike, a 550 fs of 2005 is new to me. It has the anti hopping clutch and the previous owner tell to me that is a racing bike and don't go neutral when you stop. I can find with difficoulty the neutral when bike is going slow. The oil in the clotch is ok. The bike...

Got a 650fs turbo, To my knowledge there is a guy that has a Husqvarna 510 turbo, i tried contacting him to find out what power its producing, apart from this guy to my knowledge there is no other Supermoto out there with similar power or spec , i might be wrong, so if you guys know of any other...

Been trying to find some SM wheels for my Fe570. Found a new 5" Behr rear with a crush hub and am now getting people saying its not going to fit because its a 5"? But if I remember correctly. Lots of people run the 5" in the back on the 570's. I don't mind modifying the chain guide but I don't...

Hi guys! Had my supermoto for almost a year now, it's been a daily for a few weeks on seperate occasions, it's been onroad, offroad, trackday etc. Currently got some problems I've posted in mechanical about so please help! Look forward to botherin you all. Let me know what you think of my...

Hi I have a 2005 fs650e just bought and the previous owner had the forks rebuilt. I live in San Francisco riding the steep streets. the front end feels a lil soft coming to a complete stop using the front brakes and I seen they compressed along way down the shaft after I did some wheelies. Im...

Hello, Just thought I'd register on here as I've bought a complete bin of a 2002 model 550 supermoto from a mate to repair (the things you agree to when drunk). Not sure if its an FE or an FC as its only just been dropped off and not spent any time looking at it. Its not got much going for...

Looking for a set of supermoto wheels for my FE570. I would prefer a crush hub and tubeless. The Alpina wheels look very high quality and have a tubeless option. Not sure what kind of price range these would be in however. The RAD wheels look very nice as-well and offer a crush Hub. Not...

Looking for a set of Supermoto wheels with a crush hub.

I need some street tires for my Fe570. Thinking about going forged alloy with a crush drive. Any recommendations? Would these be a more affordable option over a decent set of tubeless spoked? Also, Been going back and forth between the 5" and 4.25". I don't want it to be so tight that I...

Hi All, New to supermoto and wanted some advice/help. I have a sportsbike but have always wanted a supermoto so took the plunge, but I'm thinking the wrong one! I've bought a 2013 crf450x that I wanted to convert until I saw the fs570 and fs650! Want to sell the honda now to get a berg...