subframe

I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...

I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...

Hi Guys, I am new here and have some first questions. I hope some of you can help me with those. I have just bought an Adventurized 570 which I intend to use for Adventure Touring, Trans Euro Trail, Simple Rallying, etc. The bike has a 70 degree subframe tank. What I would like to know...

I have a 2010 FE570 and im looking for the 70 degree subframe fuel tank. Thanks!

I have a bunch of part numbers for a 4 liter subframe fuel tank which don't seem to be any good and I read a couple of threads about some guys who tried to get them made. It seems like a perfect way to carry additional fuel and I wanted to know if anyone knows if there was an option and how...

2009 Husaberg FE 570 - $5000 Miles - 2200 Hours - 152 -Sub frame aux tank (not sure which generation but it doesn't leak) -Rekluse Core EXP (original stock clutch included) -GoldenTyre front and rear with NeuTech Tubliss (90%) -2nd rear wheel with Dunlop trials tire 90% tread (tubed)...

Hi I have a 12 fe570 with a 70 degree subframe tank, my question is does anyone know how the tank joins from main to sub tanks and do they all still have some fuel left in the sub tank that won’t pull through with the fuel pump

I'm looking for 70 Degree Racing Subframe Tank Any help is really appreciated, i'll be very greatful Beppe from Italy +39 347 50 30 283

I have a subframe tank without any of the hardware and wanted to see if anyone knows where I can find either the hardware or dwgs/CAD files of the parts. I can machine parts at work with a CNC or TIG weld if needed. Thanks

Not mine https://vancouver.craigslist.ca/van/mpo/6051537488.html

Guys I'm currently on a 2012 TE250, and a friend has a 2013 TE250 that I've ridden. I really like the 13 better so I'm considering buying it. Those of you that have the 13/14 models how much trouble have you had with the subframe? I see that two of the three pieces that make up the subframe have...

Trying to install a fuel level sensor on my berg and ran into a problem removing the middle bolts of the subframe all other bolts came off easily. Noticed that the middle bolts are both connected and could remove the left side but not the right. Can anyone help? #noob

Yeah, I know I'm looking for a unicorn... but if anyone can part with a subframe tank for my FE570 I'll pay top dollar, especially for a new generation one. That one you have on your bike you are selling or have no need for, I'll put it to good use and will give you a like new OEM subframe if...

It can be new or used for a 09+ 70 degree degree bike.

Looking for a stock plastic rear subframe for a 2011 FE570, pretty sure any of the 70 degree bike subframes will work fine. maybe some of you guys that swapped to extra tanks! let me know what you got duggyb AT gmail DOT com is fastest way to get ahold of me.

Asking $50

I would love to add one of these tanks to my Husie. If anyone has one they'd consider selling, please contact me.

Can anybody make a picture of their vent tube routing. My problem is that is if the vent tube is going all the way to the front tank vent, you will end up with fuel in the vent tube which blocks air when refueling (so fill goes even slower). Now i have a small tube as vent which I block off...

Hi everyone, I would like to drain my tank, but simply pulling it out won't work as I also have a 70 degrees racing subframe tank installed. Is there any way to drain via the quick release valve installed after the filter? Any other suggestions? Thanks!

Hello, as the 70 degree subframe tanks are not available anymore, I wonder if somebody tried to do one from the original subframe, making it fuel tight? If yes, I would be interested to have some advices and information thanks