strange

BMW F 800-BASED FLAT TRACKER ON DISPLAY BY THE AMA March 5-6, 2008 - Daytona Municipal Stadium Another first for BMW at Daytona: The American Motorcycle Association (AMA) will showcase two new, customized BMW F 800 Flat Track bikes built by Dale Lineaweaver, during the Flat Track singles...

hello all, my 2000 fc501 has a small issue with the clutch i am not sure if this is normal or not but when u nail it hard in a tall gear it's like the clutch flares alittle bit and then grabs. this ismore noticeable on the bitchumen road it doesnt flare heaps just a little for a second or two...

My 1999 501 runs well at 1500 ft. When cold I put full choke and kick it through twice slow to prime the carb - then no choke and one good kick usually gets her going. Let it warm up for about 30 seconds and I can be on my way. Anyway - this week I took it up to Utah - up to 6000 ft and it...

Hello everyone, I´m new here :) and I have a problem with my Husaberg FS 650e -04 (whit FP full exhaust system). It started with that it just died when I was riding. I took it home and cleaned the carburetor a cople of times and measured all electronics, everything looked good but it...

These guys have a strange training... LOL http://www.kossan.se/udda_cross_traening.htm

The bike is an '05 FS650E with approx. 10 hrs. On pavement, when launching a bit more aggressively than normal (little more throttle and a bit of clutch slip) I'm hearing a brief sort of screeching/squealing noise seemingly from the RHS of the motor. I'm not sure exactly where from as it's...

Hi guys!!! My Berger (FC600 -00) acted real strange this weekend. I was driving last wednsday with no problem. Then i was going to check the bike this weekend. I started to kick like a maniac and the Berger fired up and the engine turned maybe 4-5 and died... That happened maybe 50-80...

i raced for 2.5 hours saturday and 4 hours today, a report of sorts will appear when i get my energy levels back up! in the meantime i need some help, the bike is making a strange noise! it only happens at high revs and especially in higher gears. what i've done lately camchain...