This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

starts

  1. AZZ

    Are eletric starts any good for fe 470

    could any help me with my husaberg fe 470 my dad brought it me i am 16.when it is cold i can start it fine every third kick but when it is hot it is another matter cant start it at all.i have been told that eletric starts are not good enough and do not turn it over fast enough could some on give...
  2. doctorcorey

    My Husaberg is too fast, too light, and starts too easily.

    :roll: At first I thought I had purchased the wrong bike.From the first time I rode it, I knew something was very wrong. I had a hard time becoming accustomed to the low center of gravity.and flickability of the chassis, and the power was so massive that my hands were literally ripped from the...
  3. berg-mex

    fe 450 e mod 2005 only starts with kick

    Hello guys: Im looking into buying one of those problem bikes that has a lot of extras but is plagued of problems. And would like to know if anyone knows any possible causes. :shock: The guy explained that from brand new his son went to a 5 day long enduro race and the bike sized ...
  4. deadeyedick

    Hard cold starts 02 FE 400

    What would be the first things to check if the berg has trouble cold starting? The bike runs fine once started and starts right up off the e button once its ran for a minute. The plug on the bike was black but not fouled. Maybe the bike is running a little rich. The local shop just...
  5. ROWLEY

    Re: job done it starts but......

    .......it won't idle! In order to solve the decomp shaft oil leak, I've taken off the battery, s/motor, trans cover etc to put an O ring on the kickstart decomp shaft (inside). This involved removal of the clutch and kickstart assembly etc. It's all back together now. It starts first or...
  6. ROWLEY

    JOB DONE, IT STARTS BUT......

    .......it won't idle! In order to solve the decomp shaft oil leak, I've taken off the battery, s/motor, trans cover etc to put an O ring on the kickstart decomp shaft (inside). This involved removal of the clutch and kickstart assembly etc. It's all back together now. It starts first or...