Hi all
A battery issue resulted in damaged to digital speedometer on my FE400e.
Good knews is that the unit in fact survived, still powers on and works of the 3V CR battery (had to be replaced), but no longer powers up from the bike and also backlight doesn't come on.
Thankfully all of the...
Hey guys,
New to this site as I just acquired my first berg. It hasn't been ruden for a while and I'm just getting it road ready. I've got it nearly ready but am having real trouble with the factory digital speedo. There is power right up to the cable connection coming out of the back of...
I have a 2002 650 FSe with the original speed/odo driven by a gear on the front wheel spindle and a cable. The speedo has both mph and km/h but shows too low speed. At estimated 70 km/h in traffic it shows about 40 km/h.
At first I thought the drive gear was replaced with one for a 21” wheel...
Hi all, first post so please be gentle with me my mate has bought a 2009 fe450, when he bought it he recond the speedo worked but now it doesn't, I've replaced the battery and checked the power supply and earth's to it but still nothing, I start the engine, spin the front wheel and try pushing...
Hey,
Got a 2013 TE300. Speedometer doesn't track anything or power on unless I press the button.
Previous owner clearly played around wiring a headlight and now coming out of my speedo is this plug (photo attached) with nothing to connect to!
Is this supposed to plug into something? Does...
My speedo/hour meter has been on the fritz for a while, and finally went out (2010 FE450) on my ride Saturday. I assume replacement is a simple plug-and-play? Also - I thought I heard before that it isn't powered - could this be as simple as changing the battery within the meter?
Suggestions...
I can't afford a new Beringer disc so purchased an EBC but even though I have adjusted the sensor for the speedo, it still won't pick up the speed.
Any help would be much appreciated
Hello,
I'm rebulding my old Berg and i'm not sure what to do with pink,grey and white wire from speedo. I know one of them is sensor wire,think grey one, but what with other two wires?
Everything was melted in fire few years ago so i don't remember where it goes and there is nothing about it...
Hi all,
I have a WP Extreme fork from a Fe600 (might from 1998, not sure) that I will install on a Suzuki DR800
It came with wheel axle and 2 spacers on it, one steel and one aluminium, similiar thickness, same i.d.
My axle is 17mm
Now I need to buy front wheel and caliper/bracket as...
Went for a ride with a friend and we both came up with different speeds and Odometer readings......Not knowing which one was reading incorrectly I fitted a GPS and it was mine.....Reading aprox 5% too fast.
I checked the wheel size upon startup and its set to the correct WS (2205) and the...
So in my other thread re my wet speedo issues… i discussed moisture issues I experienced and after drying it the back light, amd speedo didn't work but screen hour etc were still working quick blat last night and the speedo is now working but still no back light.
So the question is can this...
So when out to tuck my baby in to sleep and noticed alot of moisture in my gadge AARGG what do i? do is it saveable? Will i have to replace it with a new one? If so am i able to get a new one programed with my current hours and km's?
Thanks in advance
2004 FE450
Just changed over my dirt wheels to sumo wheel How do I reset the speedo for 17" wheel Nothing in my owners manual When the speedo lights up it shows 2205 for a few seconds and then goes away 1825 is the # for sumo wheels?
Thanks
Frank
G'day all
My speedo stopped working on a trail ride a few weeks ago - wet conditions and a heap of mud and slop. First time it has done this, despite numerous prior muddy adventures.
It started working again once bike was cleaned up and ridden on road the following week.
Yesterday on...
I couldn't find any info, so hopefully I am not repeating! Can the factory speedometer be adjusted from the 21 in stock wheel to the 17in moto wheel? It is about 10 mph off. Thank you for any information!!
On a 2014 FE350, I just changed my oil for the first time. There is an icon on the speedo of a wrench that is supposed to appear when the selected oil change interval has been reached. In my manual, it explains how to turn the icon off, but it reads as though that stops the wrench icon from...