shock

I currently have a 2009 FE570 and my rear shock just went out. Any recommendation on someone to rebuild it ? I didnt really want to tackle that one myself

Any direction as to how to change this. Manual says to use special tool? I have done lower helm a few times and have the motion pro tool for this but I can't seem to find any direction for the upper. Thanks in advance

Hello I am looking for a new shock spring I came across some that say PDS P5 PDS p10 PDS p15 PDS p20 what does that mean? here is the link that I found that info at. http://www.racetech.com/ProductSearch/1/Husaberg/FE570/2011 Thanks -DaBergman

Hello everyone, my family has a 600FE, shock absorber core diameter of 50MM, the front shock absorber oil leakage. Bought a new oil seal, but do not know the amount of oil shock absorption. Can you tell me what you know? A single shock absorber damping oil plus how much? Or from the shock...

I am interested in getting an ohlins ttx rear shock for my 2011 fs 570. Can someone tell me which p/n I should order? I thought I read somewhere to get a ktm85sx ohlins shock? What year? Thanks

I am sniffing around looking for ways to improve the suspension on my 08 FE 650. I've done all the searching and been impressed with the way bushmechanic just makes it happen. Forums are so useful with people like that around that are knowledgeable, innovative and patient with the morons like...

Hi all, I was riding my 2010 fx450 on the single trails with my brother yesterday in the Wombat State forest here in Victoria. Between trails we sometimes have ride down gravel roads that may also include a bit of a drag race. Yesterday's drag race saw me going a little too fast for the corner...

good day bergers . i just bought a 2000 FE400e , trailed it on Prairie SVRA.. i felt young again.. speed and everything is heaven..but the rear shock is busted.. Rear was bouncing everywhere.. Has anybody have a manual on how to rebuild the wp pds? thanks

I'm getting this old iron going again and I'd like to find a good setting for the shock which is the stock Ohlins. The '89 to '96 manual states that the compression (at the top of the shock) factory setting is 15 clicks out from all the way in. Fine. That's one's easy to figure out. However...

Just got my FS shock back from servicing, and removing the spacer. It's full length now, like my FE forks. I searched and can't find an answer. I want to rotate the bottom of the shock and install it so that I can adjust the rebound easily-er...from the left side. My chain slider is...

Have fe570 does any other shock from a ktm or any other bike fit,my shock is set up for supermoto and want to do some enduro in off season but to much hassle and cost to get it redone for enduro ,was hoping to buy, another shock and just switch

me stock 2011 fs 570 looking for lighter one im 150 lbs im in nor-cal maybe ktm 250 or some **** will interchange pm me sac. area to be exact. if this is wrong fourm sorry

Has anybody got a shock bottom they could sell me? (5018.0497) don't need anything else just the aluminium section the shaft screws into thanks

My rear shock wp pds is damaged and the reservoir has been rubbing . About 3 mm corner has been taken off ! Anyone else had this ? Anyone know where i can get one ??

Hi I notice some play in the bottom rear shock absorber fastening. My guess is that the bottom bearing is shot. I have removed the bottom bolt inside the swing arm and the top bolt. The bottom end of the shock is somewhat stuck in the swingarm. So my question is Is there something else that...

I just got my rear shock sprung and re-valved, and fitting it I noticed that the spring was very close, if not touching the exhaust is it the way it's supposed to be or should I be investigating further? Also I noticed on the bottom of the reservoir there was a wear mark from the loom rubbing...

I saw one for sale just a few weeks back? was it on UHE? regards Taffy

Hi guys! Quick question: can the bottom part of the front shock absorber be removed? Im talking about the part which holds the wheel shaft in place? Cheers, Tom

Is there a KTM shock that fits bolt on for the Fe570 -10? Need a spare one and EBAY is not flooded with Husaberg 70deg parts...

Hi all. This is my first post on this forum and I am after some advice that will hopefully put my mind at ease. I have just purchased a second hand 09 FE450 that only has 2200 kms / 73 hrs on the speedo. It looked well maintained and clean but there are a couple of things that have me doubting...