shock

Hi everyone. I've recently redone my bike and after tightenig all screws when fitting the exhaust pipe, I've realized that the exhaust touches the spring of the rear suspension. Can anyone tell me if that is normal cos no matter how I install it, it always end up hitting it. I've followed the...

Hi does anybody know if a rear shock from a KTM exc350 model year 2014 will fit my 2012 fe390 ?

Got the rear shock out of my -02 FE650, seems like most of it hasn't been serviced for a while, the oil was a brown sludge (is that normal?), the seals were pretty flat and one side of the top shock bushing fell out when I took the shock out. Got the new seals, but having a hard time finding...

Hello Berg family , another odd question out off curiosity. Would an Ohlins Ttx 44 t44pr1c1q1 or T44PR1C1W (from 2007 and up excs) Ohlins part number ttx kt 994.(sxf 450) With a length of 410.5 mm and a stroke of 109mm fit in the place of the stock WP unit? With what mods? Is it even...

Hi! someone know the original internal calibration (shim set) of the FC 550 2005 rear shock absorber?

This WP shock came off my personal bike & is in great condition. Will fit other years and models. Mount bolts and heims included. $250 O.B.O. plus ship from 98580 Open for trades as well. Looking for a 650 piston, liner, and crank for my 07' engine build. Thanks--Don

https://ibb.co/4dyJcVtHello, hope someone can help me. Looking for the shock in these pictures or just the guy who has it now? Found details on the Wiki. Anyone know him or where pics origanate from . Many thanks in advance https://ibb.co/4dyJcVt

Hi All, Anyone got a rear shock available for a FE 550 2003? Thanks

Husaberg 650 2007. I noticed that the spring of the rear shock vibrates when it compresses and extends slowly (for example, when I move the motorcycle while sitting on it. And the shock makes a strange squeaky noise. Is this normal?

Hey, do any of you know where to find a replacement? Preferably in Australia! Cheers

Are 2002 FE400 rear shock and 2007 FE550e rear shock the same? Would be possible to swap?

I'm looking for a 70 degree shock. Trying to put together a street tracker setup that I can swap on/off. It'll be getting rebuilt and shortened anyway so I'm no too worried about condition.

Can anyone recommend a spanner tool to adjust the shock while installed on the bike?

I'm looking for a shock for a 70 degree project. Thanks!

Looking for a rear shock from any 70 degree FE.

Hi, Took the 2 x covers off the lower joint/bearing. Bearing itself looks and feels good (no radial, lateral, or longitudinal play). But I damaged the two covers in the removal. Don't need the whole bearing replaced - just those two cover rings. Looked high and low, and can't find those...

could anyone please let me know part numbers for 2006 550 lower shock bearings?also chasing a new bump stop,where would i find one? the old one is a mess.cheers

I have an FS650, want to set it up as an enduro/offroad bike. I will keep all the supermoto stuff to swap back. I need a FS650 swingarm and shock to finish this off. Also, I do not believe the 450/550 swingarm shock will work on a 650? Thanks

WP Suspension 5018 PDS 2003 Rear Shock Absorber Workshop Manual For 2003+ Husaberg motorcycles Rear Shock Absorber

WP Suspension 5018 PDS 1999 Rear Shock Absorber Workshop Manual For 1999+ Husaberg motorcycles Rear Shock Absorber