shift

As I ride the gearbox cambor gives several positions wanted to meter as it is original see the image the manual I am not able to explain very well help please !

Recently looped out and broke the shift lever in half so after googling and searching i cant really find anything that definitly fits. Anyone tried KTM or the '09+ models shift lever on older models? I need one for my 08 450 Skickat från min SM-G950F via Tapatalk

Hi! Have swapped engine to a 550 -03 and it won't shift down sometimes. Mostly when i'm at low RPM's. It feels as when you have it in first and try to shift down. Shifting up again is no problem and I have to spam it to make a down shift. Changing the oil soon so I can have a look but...

Howdy All, Looking into older threads, on the forum, this is a inherent problem with 70 deg bergs. But there is no definitive solution posted. So I thought I would tap into any thoughts. Oil leaking from where the shift shaft spline comes out. The shift shaft has a shaft seal ring (ktm...

Could someone tell, that is there a similar sized lever like this https://ktmtwins.com/products/hammerhead-ktm1sl which would fit the 570? My footpegs are elevated significantly and the original lever is just long enough to put my boot under it. Hence I do a lot of misshifts

I have a 2004 FE 450 that appears to be leaking oil from the gear shift lever, it also weeps a little bit from the kick start. I have a new seal for the kick start just have not got time to change it yet. Is the gear shift seal an easy seal to replace, or do i need to split the case? Thank you.

hello, there are many makers and some type models like circular sensorr,lever+sensor. which one do you ve install? ;)

Guys, Just wanted to ask if anyone has found a good after market shift lever that'll fit my 04' 550. May need to go back to the standard unit. I got one of Taffy's as a spare and when it's fitted it seems the spline is a little out of synq. The head of the lever is either somewhat to...

If anyone is intersted I found a oil seal at Napa for the shift shaft for $5, part #4707 its a 12x22x7 seal and fits perfect.

Is anybody making one for an 08 FE450? $90 for a new one here. Just checking before I order it. Thx.

so i am needing to get my kick-start off and gear shifter to get the cover off. But i can not.i think that when the po stalled then engine and tried to restart it, something happened to the kick-start. it got all chewed up. anyone have any help for me? I dont want to break anything. here is some...

TL;DR: bike wouldn't shift into 6th, lots of metal on the drain plug, next oil change looked great and 6th gear is fine now (was fine the next day, even before the oil change)... any idea wtf happened? Long winded story below, including a few iceland riding pics! Hey guys, During a 4 day...

My 2001 fe501 has been spotty on shifting for the past 8-10 rides. Generally speaking it would not up shift until it warmed up. But today near the end of a tough ride in sand washes it became stuck in first gear and would not shift out, not even to neutral. Had to limp back to the truck...

I have been riding my 2011 Fe 570 for about 2 months now and have managed to adjust or replace most of the things that were not quite right for me. One thing I haven't been able to adjust or replace is the gear shift lever. It is too short for my size 12 MX boots and I have to lift my foot off...

I had a fail shift riding in heavy sand the other day and found this on my drain plug. i was shifting from 4 to 5th i think and it did not catch the gear engine reved up and wam slamed back into 4 This is an 1/4 inch 8mm socket beside them. could they have come from the fail shift...

hi. im putting my husaberg together, got the new parts today. I had a problem that 2 of the shift drum pins were loose and they broke position star. Now i dont trust that pins would stay in its place only by pressing them in and position star on. Does the position star really lock them in or...

I have been noticing that the engine casing is showing signs of leaking oil. I removed the shift lever and repacked the bearing behind it with grease. After a few rides the problem is back. A buddy of mine mentioned something about having to possibly split the cases. Anyone have any other ideas...

Hi all!, I'm a bit confused about the shift drum in a 501FE 1996 engine, it's a 6 speed gearbox, but if I'm not wrong (which I probably am! :D ) I can only find 4 unique positions on the shift drum + neutral. (The bike was unable to start after a "repair" and sold) After the 4th gear in the...

I have an 06 FE450, street plated. This weekend the transmission mis-shifted a couple times from 2nd-3rd gear. I would upshift and it would still be in second. It got bad on my ride home on the street, it took 5 tries to upshift before it finally grabbed the gear. Once it got third...

Hi all, great site here. So I just purchased this fe650 and didn't check it out very good. :( The shift shaft moves up/down, left/right about 1/16 inch. I went through all the mechanical posts back to early '05 but didn't find anything. Also, looking at the parts breakdown, there doesn't...