running

Anyone want to throw out some ideas why my 09 FE450 that I have ridden since new, is suddenly running very lean? It will start but not idle, has a fantastic bog, and pops and stuters when you rev it up. I had something similar a while back, and removing and cleaning the throttle body fixed the...

hi have got a 2003 fs650 with battery and starter removed.its got a 3 phase reg/rec on it at the the moment which i suspect is faulty.i also have a fc550 which has the reg/rec and single regulator on it but as im not using the lights they arent in use. I believe I can use the regulator to...

Gday, Ive got a new 09450FE to run in and I want to do it right, so Ill drop the oil and filter after the first hour of use. Which type of oil should I put back in after this first hour to continue running in, as the manual dosn't say, I have heard stick with 100% mineral oil for break in, or...

I have a problem if I hold the same speed over a distance. It feels like the engine is missing a stroke. I have no problems if I don't hold the throttle in the same position. Everything is OK when I ride it hard 8) What can be wrong? It`s a 08 Husaberg 650.

This is bad i am guessing and I'm in quite a bit of panic. Quick background story etc - Husaberg FE550e 07 model (love it by the way) rode hard for around 3 hours in the bush come out of the bush onto some tar and gave it all she had. then no noise or anything but i looked behind and im...

Don't know if this has been posted before but makes interesting reading. Takes some balls to do it on a new or rebuilt engine but have a mate who's done this method on quite a few engines, 2 and 4 stroke, with great results. I usually take it real easy on a new engine for the first hundred...

Hello, Over the past several months, I've been putting my '95 FE 350 back into proper order and have learned a LOT from these boards. My thanks to everyone who unselfishly shares their experience and knowledge here. Is there anyone else out there running a 350? It doesn't seem to have...

Can anyone tell me the recommended hours/miles to run in my 08 450. I have been told 3 hours, i have done this but only done 75 miles but this doesn`t seem enough also is it recommended to use fully synthetic oil after dropping running in oil. At what hours/miles do you recommend doing first...

I bought a 97 FE 600 over a month ago now and it has been nothing but trouble since 30 miles down the road from buying it. I'm no mechanic so sorry if my description is not very clear but here goes The initial problem was that it was not easy to start and would cut out randomly every half an...

my jetting is the stock needle, clip is 4th from top, pj is 42, mj was 175. Fuel screw out 2 turns. I run at 4000 ft elevation, temps 40-80F the bike starts easy, runs smooth and is a dream. SO sunday I'm riding and we stopped alot, maybe I let the bike run too long too hot and about half...

What is general consensus around here as far break in .I've got a brand new 550 just itching for it's first real ride ,Hopefully tomorrow. I'm just wondering if I should run it like I'm going to drive it or take it easy.

Finally got the 550 back up and running the last thing I was waiting for was my reground OEM cam to a X2 profile, along with a set of Kibblewhite valve springs and more modified carb settings I have to say it's just about perfect. Gone now has that harsh slapping noise due to the slightly...

Piicking up new fe450... any suggestions other than good common sensewhile running in?...Thanx

Good news Got a call from Husaberg NA today and we spent a half hour on the phone getting the online parts ordering system working.They now have the top movers in stock in Ohio,and things are coming together quickly now.New 08 bikes have also arrived.

I'm new to Husaberg with a 07 550 FE fitted with a factory fan. When the fan is running it will drain the battery even when the bike is running. I was wondering if it is possible to run the fan on the AC side with just a rectifier or would I need a regulator as well? Looking at the wiring digram...

hi got the berg running but it still smokes a lot. all ov the time wen u rev it ride it or let it idle. iv changed barrel and head of my other berg thats the same but doesnt smoke but leckys are naft on that 1 and iv changed the oil reed valve and head gasket. does any one know wots wrong or...

DEAR SIRS AS THIS IS ONLY MY SECOND CRY FOR HELP I DO LOG ON TO THE SITE EVERY DAY. I HAVE A 2003 650 FS THE VALVES HAVE BEEN SET SPOT ON TO THE OWNERS DOC, BUT THE BIKE STILL RUNS AND STARTS VERY POOR I CAN SPEND ANYTHING UPTO 30 MINS TRYING TO START IT FROM COLD CHOKE ON AND NO THROTTLE IT...

Hello all Going to pick up my 2007 FE650 this weekend, is anyone out there running a 650 @ 7000 feet? If so what jetting specks have you found to work good? Dan says they are waaaayyy lean from factory and told me what to richen up, but would also like to here what you have found to work too...

Hey all I have to say this is a great site we got here........ I am having some problem with my berg (05 450), it is running idle to fast (by turning the adjusting screw) and the difference between idle and chokes is too much... Is there anybody out there who now can be wrong...? I am 39...