rad

has anyone had a radiator cap fail ? I went for a ride the other day and it pumped coolant all over the motor and my boot. When I refilled it (just over the core ) the top of the radiator and cap were not red hot, it did the same with the coolant level ending up well below the core. It only...

Hi all just seen that Samco sport are making blue rad hose sets for FE390/450 & FX450 2009/2010 models[attachment=0:26kb8ki5]samco hose logo.jpg[/attachment:26kb8ki5]

Fuel tank and rad panels off of a FE450 2005 on ebay: http://cgi.ebay.co.uk/Husaberg-Fuel-Tan ... 439d670a8d

Guys, I'm pretty sure I read it here a while ago but a search isn't yielding me anything. Did someone mention a "trick" to installing the fuel tank when you have the radiator fan installed on the right radiator without loosening the radiator and rotating it forward? Man it's tight! Any help...

Hi All, Picked up my 04 FS650, had a few questions I wanted answering (if someone doesnt mind feeding the noob :lol: ) Ive had a good read of the owners doc, so most of it I understand but just the following I need a bit of guidance. 1. Rad Guards - Will a CRF450 guard fit with no...

Does anyone know if the tube style perimeter rad guards from the late model 08/09 KTM 450/530's fit onto an 09 FE570? I personally prefer the extra strength from the perimeter style, as opposed to the front protection offered by Force and Bulletproof et al.

Hey Guy's. I've searched for ever but cant find info/pictures of an Omero 6.2L fuel tank with the RM rad shrouds. I've seen it on Omero's site but its a poor picture at best. I happen to live only 15 minutes from the local motocross track :D and I'm looking for a slimmer option than the 10.5L...

I have a 2004 fe450 I want to put a stock cooling fan kit on it Yes - I put a new wiring harness in it and it has the fan plug 1) My rad does not have the fitting for the thermostat Will a rad from a 2006 or newer fit it 2) With the fan mounted on will my stock tank work or will it inerfere...

Does anyone know where i can find BOSS rad guards, and I have heard that they have a skid plate available for the bike as the one I have bought from the Force Depot is garbage, pretty but not strong enough.

Anyone know if bergdaddy still makes the aluminum rad louvers in his gallery? I have the BOSS guards but they restrict too much air at low speed in the CA desert during the summer. I know Dirt Rider pulled them off their 650 test bike and guys like Dylan Debel have had issues as well. I have...

Anyone know if those trick looking blue high heat rad hoses are available for Bergs? Specifically an 06 fe450? If yes - who carries them? Pro Circuit carries them for all the Jap bikes but nothing for bikes of quality and distinction. thanks

Anybody know the inside diameter of the rad hose on a FS650E. Thanks

Any suggestions on where to find these ? I appreciate your help... Darren

Had an extra KTM catch can.....works great as a rad overflow....

to remove the inspection covers to check the valves do you need to take the radiator out ? and if so how ? it (the radiator) wont just slide out as it hits the breather hole on the frame. whats the trick?? :?:

Hi Bergers, I finally got around to updating my gallery with photos of the old girl, 98 FE501, with her latest acoutrements installed. http://www.husaberg.org/modules.php?set ... _album.php The damper is really good. Its the first time I've ridden with one and after some research I...

How does one install the Boss rad guard? Mine are the slimmer one. Of the two horizontal mounts which hold the louvers and the tank shrouds at the same time, one is longer by an inch. The diameter is too large for it to go all the way through the top holes of the guard. Am I supposed to drill...

I need some help finding both the radiator guard (plastic or alloy) and a rad guard to protect in the event of a crash like the Devol guards! Do KTM guards work? I've searched, but have not realy found any that bolt on to my new monster! Any links would be awesome! By the way this new 650 rocks...

anyone help me please? i need a rad hose that exits the water jacket, does a 90 to face the front wheel, goes horizontally to around the front corner of the cylinder jacket, does another 90d vertically and then goes straight up to the top of the radiator inlet. anyone seen any kind of...

Are you guys using a guard for the lower hose on left side? It sure sticks out on mine. Not knowing if anyone makes a guard other than skidplate with extension, I made one for mine. Made me nervous about getting it poked with brush or something. Of course, I never fall down, (ha!).