quick

Hi can anybody tell me if a timing chain from a 610 husky is the same pitch etc as a 400 fe husaberg as i got a new one for a husky but not a husaberg it looks the same and i can adjust the length is there any little fitting tricks i could be made aware of cheers all

How to I tell if my FE450 is a USA?AUS?EU?UK? it is a FE450 2006 Factory Works. Thanks

Went out with my cousin and a friend to one of our local riding spots (dis-used old coal mine grounds) at the weekend for a few hours. I was on my '00 FC600 (6 speed), My cousin was on his '03 CRF450 and my friend was on his '04 KXF250. Jumping from one bike to another revealed the following...

Can anyone help please?Have a 2003 fs650e the right hand indicators are flashing at twice the normal rate ,left side is fine,all bulbs are fine,ive been told the switchgear could be faulty i bypassed it and it still does the same thing,any help would be appreciated thanks!!! :(

Not next to my bike I need to know the OD of the exhaust Header by the Hot start plunger. Looking at making a heat shield today and didn't measure before leaving for work.. HELP

Available at BOSS......... :eep: :rock:

hey guys........ putting my berg in a box together, still on the crankcase. first question should be an easy one. bike is a 99 fe400e, on the left side of the case behind the kicker idler gear on the inside of the case, there are 2 threaded holes (for screws or bolts) and a raised flat...

Hi all, Was reading about engine removal time of a WR400 the other day and it got me thinking one area Husaberg excel at compared to KTM, Yamaha etc. That front motor plate makes it so quick n easy- just leave the carb hanging, battery stays put too and move it fowards and pull it out...

Would just like to say hey. I bought an 05 fe450e after three years of surgeries. 4 back, 1 collarbone plate. Hope you guys can steer me the right way in setting the bike up. Look foward chating with yous! Ramo

First of all hello!!! I've recently bought a 2001 400 and chuffin love it!! I mainly use it for super moto, but do have some enduro wheels as well. But I have a bad wrist and struggle to get full throttle without getting a second hand full. does anybody do quick turn throttles for Husabergs?

I was told that an aftermarket muffler designed for any of the 2002 Husabergs are all interchangeable. (i.e. the big gun designed for the 01-03 400 will fit my 02 470). Just wanted to check with the experts before I placed the order.

Is there such a modification for us? I really struggle to get to fully open without an extra grab, or moving my grip further forward in the first place. Road racers use a quick action throttle, is there one I can fit to my Berg? Thanks Geoff

I hope this ignites some creativity. It sure makes engine work pleasant. This makes it secure by expanding the stud with a pipe plug