questions

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. deadeyedick

    2001 Husaberg fx470e questions

    I had a few questions about this bike as I am planning on buying it this Monday the 4th. Basically I wanted to know if this bike was known for any problems. This particular bike came out late in 2001 and came with the 2002 options. It has the larger 48mm forks and the other 2002 options. The...
  2. F

    First time oil change on my own!! Questions?

    Hi guys this is to do with oil. I just did my first oil and Filter change on my own. Drained oil out as per Husaberg video. I did notice tiny metal flakes not many a few really fine ones mainly on the plastic and metal mesh filter (Berg is FE400 2002 with under 1500km on it). All other oil...
  3. Barry

    Keihin needle size questions

    I've been searching the available posts on jetting for the Keihins. I have found that you folks out there are using all sorts of main jets with different needles. Such as: OCFMR OCEMS OCFMP OBDTM EKQ (?) What is the code for the needles? According to the '04 tech specs, my FE550 is...
  4. P

    Carb questions?

    I a have a an 02 550. When the bike is at upper rpm and in the higher gear range (4th or higher) motor seems to cutout or go flat at WOT. Motor does not pop or backfire but acts like it is running out of fuel. I am not running the motor at "optinum valve float". Bike is stock except for Big...
  5. F

    First berg/first ride questions.

    I have been checking this site daily since I decided to buy a Berg, it should arrive next week. I am buying an 02 400 fe and want to make sure I break it in properly. I am assuming a couple of hours easy riding and then check/adjust valves and do an oil change. Any other recommendations? I will...
Back
Top